TM400X2AD - Receiver Rockford Fosgate - Free user manual and instructions
Find the device manual for free TM400X2AD Rockford Fosgate in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Marine Audio Receiver |
| Brand | Rockford Fosgate |
| Model | TM400X2AD |
| Dimensions (W x H x D) | 7.2 x 2.5 x 6.5 inches |
| Weight | 2.8 lbs |
| Power Supply Voltage | 12V DC (Negative Ground) |
| Maximum Power Output | 400W (2 x 200W RMS @ 2 ohms) |
| Frequency Response | 20 Hz – 20 kHz (±1 dB) |
| Signal-to-Noise Ratio | >100 dB (A-weighted) |
| Bluetooth Connectivity | Yes, A2DP and AVRCP |
| Water Resistance Rating | IPX6 (Protected against powerful water jets) |
| Inputs | 3 pair RCA preamp outputs, USB, AUX |
| Outputs | 2 channels speaker output, subwoofer preamp output |
| Built-in Equalizer | 7-band graphic EQ, presets |
| Remote Control | Included wired remote |
| Mounting Options | Flush mount or bracket mount |
| Operating Temperature Range | -20°C to 70°C |
| Recommended Fuse Rating | 30A (inline fuse) |
| Cleaning Instructions | Wipe with a soft, damp cloth; do not use harsh chemicals |
| Warranty | 1 year limited |
Frequently Asked Questions - TM400X2AD Rockford Fosgate
How do I connect the TM400X2AD to my boat's battery?
Connect the red wire to 12V positive and black wire to ground (negative). Use a 30A fuse near the battery for protection.
Can I pair my smartphone via Bluetooth?
Yes, enable Bluetooth on your phone, select 'TM400X2AD' from the available devices. Enter '0000' if prompted.
What is the maximum speaker load per channel?
Each channel can drive speakers with impedance of 2 to 8 ohms. For 2 ohm stereo, use 2 ohm rated speakers.
How do I reset the unit if it freezes?
Press and hold the 'Reset' button on the front panel using a paperclip for 5 seconds.
Is this receiver weatherproof?
Yes, it has an IPX6 rating, meaning it can withstand powerful water sprays but is not submersible.
Can I connect an external amplifier?
Yes, use the RCA preamp outputs. Connect one pair to the amplifier's input and set the receiver's front/rear fader as needed.
How do I adjust the equalizer?
Press 'EQ' button on the front panel or remote, then use the +/- buttons to adjust each of the 7 bands (60Hz, 150Hz, 400Hz, 1kHz, 2.5kHz, 6kHz, 16kHz).
My remote control stopped working. What should I do?
Replace the remote battery (CR2032). If it still doesn't work, check for obstructions and ensure the remote's IR sensor is clean.
What is the recommended maintenance for the TM400X2AD?
Periodically wipe the faceplate with a soft cloth. Avoid exposing to direct sunlight for long periods. Ensure the vent is not blocked.
How do I perform a factory reset?
Press and hold the 'Source' and 'EQ' buttons simultaneously for 5 seconds until the display flashes. All settings will be restored to default.
User questions about TM400X2AD Rockford Fosgate
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual TM400X2AD - Rockford Fosgate and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TM400X2AD by Rockford Fosgate.
USER MANUAL TM400X2AD Rockford Fosgate
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Rockford Fosgate
Model : TM400X2AD
Category : Receiver