Mic/Line Mixer RM82 - Blender ROLLS - Free user manual and instructions
Find the device manual for free Mic/Line Mixer RM82 ROLLS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Mic/Line Mixer |
| Number of Inputs | 8 (combo XLR/TRS) |
| Number of Outputs | 1 (balanced XLR) |
| Phantom Power | +48V, switchable per channel |
| Input Impedance | Mic: 2.2 kΩ; Line: 20 kΩ |
| Frequency Response | 20 Hz – 20 kHz, ±0.5 dB |
| Max Input Level | Mic: -10 dBu; Line: +22 dBu |
| Max Output Level | +20 dBu |
| Dimensions (W×D×H) | 19 × 10.5 × 1.75 inches (483 × 267 × 44 mm) |
| Rack Mountable | Yes, 1U standard rack space |
| Weight | 3.5 lbs (1.6 kg) |
| Power Supply | 12V DC, 500 mA (external adapter included) |
| Power Consumption | 6 W |
| Controls | Individual level knobs, mute switch, phantom power switch |
| Indicators | Peak LED per channel, power LED |
| Construction | Steel chassis, black finish |
| Intended Use | Stage, studio, installed sound |
| Cleaning | Use dry cloth; avoid liquids |
| Safety Features | Reverse polarity protection, transient suppression |
| Spare Parts Availability | Contact Rolls authorized service centers |
Frequently Asked Questions - Mic/Line Mixer RM82 ROLLS
How many inputs does the RM82 have?
The RM82 has 8 combo inputs (XLR/TRS) that accept both mic and line level signals.
Does the RM82 provide phantom power?
Yes, +48V phantom power is available and can be switched on/off per channel using the front panel switches.
How do I connect the RM82 to a mixing console?
Connect a balanced XLR cable from the main output on the rear panel to an input on your mixer or audio interface.
What power supply does the RM82 require?
It requires a 12V DC 500mA adapter with a center-positive 2.1mm jack. A suitable adapter is included.
Can I rack mount the RM82?
Yes, it is designed to fit a standard 1U 19-inch rack. Use the included rack ears for mounting.
What is the maximum input level for line inputs?
The maximum line input level is +22 dBu. For mic inputs, it is -10 dBu before clipping.
How do I mute a channel?
Each channel has a mute switch that cuts the signal to the main output. The switch has a red indicator when muted.
What do the peak LEDs indicate?
The peak LED lights up when the input signal is within 6 dB of clipping. Adjust the level knob to keep it off for clean sound.
Can I use the RM82 with unbalanced gear?
Yes, use a TRS to TS cable for unbalanced connections. The input ground is referenced to the chassis.
How do I clean the RM82?
Disconnect power and use a soft dry cloth to wipe the front panel. Do not use solvents or spray liquids.
User questions about Mic/Line Mixer RM82 ROLLS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Blender in PDF format for free! Find your manual Mic/Line Mixer RM82 - ROLLS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Mic/Line Mixer RM82 by ROLLS.
USER MANUAL Mic/Line Mixer RM82 ROLLS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ROLLS
Model : Mic/Line Mixer RM82
Category : Blender