XPR522 - Receiver DUAL - Free user manual and instructions
Find the device manual for free XPR522 DUAL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Receiver |
| Brand | Dual |
| Model | XPR522 |
| Dimensions (W x H x D) | 430 mm x 100 mm x 300 mm |
| Weight | 5.0 kg |
| Power Supply | AC 120 V ~ 60 Hz |
| Power Consumption | 150 W |
| Frequency Range (FM) | 87.5 – 108 MHz |
| Frequency Range (AM) | 530 – 1710 kHz |
| Audio Output Power | 100 W per channel (4 Ω, 1 kHz, 0.1% THD) |
| Speaker Impedance | 4 – 16 Ω |
| Inputs | 3x RCA audio, 1x Phono, 1x Optical, 1x Coaxial |
| Outputs | 2x Speaker terminals, 1x Subwoofer pre-out |
| Remote Control | Included (batteries not included) |
| Display | LCD with blue backlight |
| Preset Stations | 30 FM / 15 AM |
| Sleep Timer | Yes, up to 90 minutes |
| Material | Metal chassis, plastic front panel |
| Cleaning | Wipe with a soft, dry cloth |
| Safety | Do not expose to rain or moisture |
| Repairability | Contact authorized service center |
Frequently Asked Questions - XPR522 DUAL
How do I connect the XPR522 receiver to my speakers?
Connect speaker wires to the Speaker terminals on the back panel. Ensure correct polarity (red to +, black to -). Use 4-16 Ω speakers.
How do I set up the remote control?
Insert two AAA batteries (not included) into the remote, matching the polarity. Point the remote at the receiver's IR sensor.
Why is there no sound from my speakers?
Check that the Input source is selected correctly, volume is turned up, and speakers are connected properly. Also ensure the receiver is not in mute mode.
Can I connect a turntable to this receiver?
Yes, use the Phono input for a turntable with a moving magnet cartridge. Ensure the turntable has a ground wire connected to the receiver's ground terminal.
How do I tune into radio stations?
Press the Band button to select FM or AM. Use the Tuning knob or seek buttons to find stations. Press and hold a preset button to store.
What is the maximum power output of the XPR522?
The receiver delivers 100 watts per channel into 4 Ω at 0.1% THD, suitable for most home speakers.
How do I clean the receiver?
Unplug the receiver. Wipe the exterior with a soft, dry cloth. Do not use chemical cleaners or water.
Can I use this receiver with a TV?
Yes, connect your TV's audio output (RCA, optical, or coaxial) to the corresponding input on the receiver. Select the input using the Input selector.
What does the sleep timer do?
The Sleep timer automatically turns off the receiver after a set time (up to 90 minutes). Press the Sleep button to adjust.
Where can I find a replacement remote or manual?
Visit the Dual support website or contact customer service for replacement parts. The manual is available for free download at notice-facile.com.
User questions about XPR522 DUAL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual XPR522 - DUAL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XPR522 by DUAL.
USER MANUAL XPR522 DUAL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DUAL
Model : XPR522
Category : Receiver