ADP 7453 WH - Dishwasher WHIRLPOOL - Free user manual and instructions
Find the device manual for free ADP 7453 WH WHIRLPOOL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Brand | Whirlpool |
| Model | ADP 7453 WH |
| Height (mm) | 820 |
| Width (mm) | 450 |
| Depth (mm) | 570 |
| Weight (kg) | 38 |
| Energy Rating | A+ |
| Annual Energy Consumption (kWh) | 260 |
| Water Consumption per Cycle (L) | 12 |
| Noise Level (dB) | 48 |
| Place Settings | 10 |
| Number of Programs | 5 |
| Programs | Eco, Intensive, Normal, Quick, Pre-rinse |
| Drying System | Passive |
| Water Heating System | Built-in heater |
| Delay Start | Maximum 24 hours |
| Self-Cleaning Filter | Manual cleaning required |
| Adjustable Racks | Yes, upper rack |
| Electrical Connection | 220-240 V, 50 Hz |
| Power Consumption (W) | 1900 |
| Spare Parts Availability | Available for 10 years |
| Repairability Index | 7.5/10 |
Frequently Asked Questions - ADP 7453 WH WHIRLPOOL
How do I install the dishwasher?
Ensure the appliance is level and connected to the water supply and drainage. Refer to the installation guide in the manual for detailed steps.
What detergent should I use?
Use a dishwasher detergent in powder, gel, or tablet form. Avoid hand dishwashing liquid as it causes foaming.
How do I clean the filters?
Remove the lower rack, unscrew the filter assembly, rinse under running water, and replace. Clean filters monthly for optimal performance.
Why is the dishwasher not starting?
Check that the door is closed properly, the child lock is off, and the water supply is turned on. If the issue persists, consult the troubleshooting section.
How do I adjust the rinse aid setting?
Open the rinse aid dispenser, adjust the dial to a higher setting for better drying. The setting range is 1 to 6.
What should I do if the dishes are not drying?
Ensure the rinse aid is filled, select a program with drying, and avoid overloading. For plastic items, open the door slightly after cycle to aid drying.
How do I activate the child lock?
Press and hold the Start button for 3 seconds until the child lock icon appears. Repeat to deactivate.
What is the maximum delay start time?
The delay start can be set up to 24 hours. Press the Delay button repeatedly to select the desired delay.
How do I clean the exterior?
Wipe with a soft damp cloth and mild detergent. Avoid abrasive cleaners or scouring pads to prevent scratches.
Where can I find spare parts?
Spare parts are available through authorized Whirlpool service centers. Use the model number ADP 7453 WH for correct parts.
User questions about ADP 7453 WH WHIRLPOOL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual ADP 7453 WH - WHIRLPOOL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ADP 7453 WH by WHIRLPOOL.