FLS 868 C - Washing machine ZANUSSI - Free user manual and instructions
Find the device manual for free FLS 868 C ZANUSSI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Washing Machine |
| Brand | Zanussi |
| Model | FLS 868 C |
| Capacity | 6 kg |
| Spin Speed | 800 rpm |
| Energy Class | A |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Weight | 65 kg |
| Power Supply | 220-240 V, 50 Hz |
| Water Consumption | Approx. 45 L per cycle |
| Noise Level (Wash/Spin) | 55 dB / 75 dB |
| Number of Programs | 16 |
| Programs | Cotton, Synthetics, Delicates, Wool, Quick, Eco, etc. |
| Features | Delay Start, Child Lock, Half Load, Rinse Hold |
| Installation Type | Freestanding |
| Door Opening | Left hinge (reversible) |
| Safety Features | Overflow protection, Unbalanced load detection, Door lock |
| Maintenance | Clean filter regularly, descale periodically |
| Repairability Index | Available spare parts for common components |
Frequently Asked Questions - FLS 868 C ZANUSSI
How to clean the filter on the Zanussi FLS 868 C?
The filter is located at the bottom front behind a small door. Open the door, unscrew the filter counterclockwise, clean it under running water, and screw it back tightly. Make sure to have a cloth to catch any residual water.
What does error code E10 mean?
Error code E10 indicates a water filling problem. Check that the water tap is open, the inlet hose is not kinked, and the water pressure is sufficient. If the problem persists, the inlet valve may be faulty.
Why is the washing machine not filling with water?
Possible causes: closed water tap, clogged inlet hose filter, faulty water inlet valve, or a problem with the pressure switch. Check the tap and clean the filter first.
How to fix an unbalanced load in the Zanussi FLS 868 C?
If the machine stops or vibrates excessively due to an unbalanced load, open the door and redistribute the laundry evenly. Avoid washing single heavy items like a duvet or rug. Restart the spin cycle.
Why is the machine not spinning?
Possible reasons: unbalanced load, drain pump clogged, or a faulty motor control board. First, check for an unbalanced load and clean the drain filter. If the issue continues, the belt or motor may need inspection.
How to open the door if it is stuck?
If the door does not open after a cycle, it may be due to water inside the drum. Select a drain or spin program to remove water. If still stuck, wait a few minutes for the door lock to release. Do not force the door.
What is the maximum load for a quick wash?
For the Quick Wash program (usually 30 minutes), the maximum recommended load is 3 kg to ensure effective cleaning. Overloading may result in poor wash performance.
How to enable the child lock?
Press and hold the 'Start/Pause' button for about 5 seconds until the child lock indicator lights up. To disable, press and hold again for 5 seconds. Refer to the manual for exact key combination.
Why is there water on the floor around the machine?
Check the inlet hose connections, drain hose, and door seal for leaks. Also ensure the drain hose is properly inserted into the sink or standpipe. Overfilling can also cause leaks due to a faulty pressure switch.
How to reset the Zanussi FLS 868 C?
To reset, turn the program selector knob to 'Off' position. Wait a few seconds, then select a new program and press 'Start/Pause'. If the machine is unresponsive, unplug it for 1 minute and plug it back in.
User questions about FLS 868 C ZANUSSI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual FLS 868 C - ZANUSSI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FLS 868 C by ZANUSSI.