SmartPro SMART1548ET - Inverter Tripp Lite - Free user manual and instructions
Find the device manual for free SmartPro SMART1548ET Tripp Lite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | UPS (Uninterruptible Power Supply) |
| Model | SmartPro SMART1548ET |
| Brand | Tripp Lite |
| Form Factor | Rackmount / Tower convertible |
| VA Rating | 1500 VA |
| Watt Rating | 1200 W |
| Input Voltage | 120 V AC |
| Output Voltage | 120 V AC |
| Number of Outlets | 8 (battery + surge) + 4 (surge only) |
| Battery Type | Sealed lead-acid (maintenance-free) |
| Battery Runtime | Up to 20 minutes at half load |
| Dimensions (HxWxD) | 3.5 x 17.3 x 14.5 inches (8.9 x 43.9 x 36.8 cm) |
| Weight | 38.5 lbs (17.5 kg) |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Communication Ports | USB, RS-232, EPO (emergency power off) |
| Display | LCD status screen with button controls |
| Protection Features | Surge suppression, overload protection, voltage regulation (AVR) |
| Maintenance | Periodic battery self-test; user-replaceable battery |
| Certifications | UL, cUL, NOM, FCC |
| Warranty | 2 years (limited) |
Frequently Asked Questions - SmartPro SMART1548ET Tripp Lite
How do I replace the battery in the SmartPro SMART1548ET?
The SmartPro SMART1548ET has a user-replaceable battery. To replace, remove the front bezel, disconnect the battery harness, slide out the old battery, and install the new one. Refer to the manual for specific model RBC (replacement battery cartridge).
What is the runtime of the SMART1548ET at full load?
At full load (1200W), the runtime is approximately 5 minutes. At half load (600W), runtime extends to about 20 minutes.
Can the SMART1548ET be mounted in a rack?
Yes, the SMART1548ET is designed for rackmount (2U) or tower orientation. It includes rackmount brackets and can be placed on a shelf or in a server rack.
Does the UPS have surge protection?
Yes, it provides surge protection on all outlets. It also includes AVR (automatic voltage regulation) to correct undervoltages and overvoltages without switching to battery.
How do I connect the UPS to a computer for monitoring?
Use the USB or RS-232 port to connect to a computer. Tripp Lite provides PowerAlert software for remote monitoring and automatic shutdown.
What does the EPO port do?
The EPO (emergency power off) port allows connection to a remote emergency power off switch to immediately cut output power in an emergency.
Is the SMART1548ET compatible with a generator?
Yes, it is compatible with generator input, but the generator should provide stable simulated sine wave output. The UPS has a wide input voltage range to handle typical generator fluctuations.
How do I perform a self-test on the UPS?
Press the TEST button on the front panel briefly. The UPS will switch to battery for a few seconds and then return to AC. The LCD will show test results.
What is the typical lifespan of the battery?
Under normal conditions, the sealed lead-acid battery lasts 3–5 years. Factors like high temperature and frequent cycling can shorten lifespan.
Can I plug a power strip into the UPS?
It is not recommended to plug a power strip into the SMART1548ET as it may overload the UPS. Use the 8 battery-backed outlets for sensitive equipment.
User questions about SmartPro SMART1548ET Tripp Lite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Inverter in PDF format for free! Find your manual SmartPro SMART1548ET - Tripp Lite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SmartPro SMART1548ET by Tripp Lite.
USER MANUAL SmartPro SMART1548ET Tripp Lite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Tripp Lite
Model : SmartPro SMART1548ET
Category : Inverter