TimelapseCam Pro - Camera Moultrie - Free user manual and instructions
Find the device manual for free TimelapseCam Pro Moultrie in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Trail Camera |
| Brand | Moultrie |
| Model | TimelapseCam Pro |
| Image Resolution | 12 MP |
| Video Resolution | 1080p |
| Trigger Speed | 0.5 seconds |
| Detection Range | 60 feet |
| Infrared LEDs | Low-glow |
| Memory Card Type | SD up to 32 GB |
| Power Source | 8 AA batteries (not included) |
| Battery Life | Up to 12 months |
| Dimensions | 5.5 x 3.5 x 2.5 inches |
| Weight | 0.8 lbs (without batteries) |
| Operating Temperature | -10°F to 110°F |
| Time Lapse Interval | 1 sec to 60 min |
| Maintenance | Clean lens with soft cloth; check batteries and SD card regularly |
| Safety | Do not disassemble; keep away from children; use only recommended batteries |
| Spare Parts / Repairability | Contact Moultrie support; non-user-serviceable internal parts |
| Warranty | 1 year limited |
Frequently Asked Questions - TimelapseCam Pro Moultrie
How do I set up the Moultrie TimelapseCam Pro for time-lapse photography?
Insert SD card and 8 AA batteries. Power on the camera and navigate to the Time Lapse mode. Set the desired interval (e.g., 1 second to 60 minutes). Mount the camera securely facing the target. Press OK to start.
What type of SD card is compatible?
The camera supports SD/SDHC cards up to 32 GB. For best performance, use a high-speed card (Class 10 or higher) for video recording.
How long do batteries last?
Battery life depends on usage and temperature. With alkaline AA batteries, expect up to 12 months in standby. Lithium batteries provide longer life in cold weather.
Can I view photos/videos on my phone?
No, this model does not have built-in Wi-Fi or Bluetooth. You must remove the SD card and use a card reader or computer to view files.
What is the trigger speed for motion detection?
The trigger speed is approximately 0.5 seconds. This means the camera will capture an image within half a second of detecting motion.
How do I clean the camera lens?
Use a soft, lint-free cloth. If necessary, slightly dampen with lens cleaning solution. Avoid touching the lens with fingers. Wipe gently in a circular motion.
The camera is not taking pictures. What should I check?
First, ensure batteries are fresh and inserted correctly. Check that the SD card is formatted and has free space. Verify that the camera is set to the correct mode (motion or time-lapse). Also, ensure the camera is not in setup mode.
Can I use rechargeable batteries?
Yes, you can use rechargeable NiMH AA batteries. However, note that battery life may be shorter than alkaline. Ensure they are fully charged before use.
What is the detection range at night?
The infrared LEDs provide night vision up to 60 feet. The low-glow IR is less visible to animals, reducing spooking.
How do I reset the camera to factory settings?
Go to the Setup menu and select 'Reset' or 'Factory Default'. Alternatively, remove batteries for 10 seconds to reboot. Refer to the manual for exact menu navigation.
User questions about TimelapseCam Pro Moultrie
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Camera in PDF format for free! Find your manual TimelapseCam Pro - Moultrie and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TimelapseCam Pro by Moultrie.