SP-5AWD - Loudspeaker Speco Technologies - Free user manual and instructions
Find the device manual for free SP-5AWD Speco Technologies in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Outdoor Loudspeaker |
| Brand | Speco Technologies |
| Model | SP-5AWD |
| Driver Configuration | 2-Way: 5.25" Woofer, 0.75" Tweeter |
| Power Handling (RMS) | 40 Watts |
| Power Handling (Peak) | 80 Watts |
| Impedance | 8 Ohms |
| Frequency Response | 70 Hz - 20 kHz |
| Sensitivity | 90 dB (1W/1m) |
| Enclosure Material | High-impact ABS Plastic |
| Weather Resistance | Yes (All-Weather Design) |
| Mounting Type | Wall-Mountable with Included Bracket |
| Dimensions (W x H x D) | 7.5 x 11.0 x 6.0 inches (19 x 28 x 15 cm) |
| Weight | 4.5 lbs (2.04 kg) |
| Input Connectors | Spring-Loaded Terminals |
| Color | White or Black (check variant) |
| Power Source | Passive (No Amplifier Built-in) |
| Cleaning | Wipe with damp cloth; avoid abrasive cleaners |
| Safety | For outdoor use, ensure secure mounting and weatherproof connections |
Frequently Asked Questions - SP-5AWD Speco Technologies
What is the best way to install the SP-5AWD speaker outdoors?
Mount the speaker using the included bracket on a sturdy wall or under an eave. Ensure the speaker is angled towards the listening area and the cables are protected from moisture using silicone sealant.
What type of amplifier should I use with this speaker?
Use a stereo amplifier or receiver rated between 10-80 watts RMS per channel at 8 ohms. Avoid over-powering to prevent damage.
Can the SP-5AWD be used in direct rain or snow?
Yes, it is designed for all-weather use. However, for best longevity, install it under a covered area to minimize direct exposure.
How do I connect the speaker wires?
Strip 1/4 inch of insulation from the wire ends, press the spring-loaded terminal down, insert the wire, and release. Ensure positive to positive (red) and negative to negative (black).
What are the dimensions and weight of the SP-5AWD?
The speaker measures 7.5 x 11.0 x 6.0 inches and weighs 4.5 lbs. Refer to the specifications table for exact measurements.
How should I clean the speaker?
Wipe the exterior with a soft, damp cloth. Do not use harsh chemicals or submerge the speaker in water.
Can I paint the speaker to match my exterior?
Yes, you can paint the cabinet with outdoor-grade spray paint. Remove the grille first and mask the driver and terminals.
What is the recommended placement for optimal sound?
Place speakers at ear level when seated, about 6-10 feet apart for stereo. Avoid corners to reduce bass buildup.
Is the speaker compatible with 70V systems?
No, the SP-5AWD is an 8-ohm speaker standard for home audio. For 70V systems, you would need an external transformer.
What is the warranty period for this product?
Speco Technologies typically offers a 1-year limited warranty. Contact their support for specific terms.
User questions about SP-5AWD Speco Technologies
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual SP-5AWD - Speco Technologies and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SP-5AWD by Speco Technologies.
USER MANUAL SP-5AWD Speco Technologies
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Speco Technologies
Model : SP-5AWD
Category : Loudspeaker