RA 6025 - Uncategorized SHURE - Free user manual and instructions
Find the device manual for free RA 6025 SHURE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Remote Antenna Amplifier |
| Brand | Shure |
| Model | RA 6025 |
| Dimensions (H x W x D) | 1.75 x 8.5 x 6.5 inches (1U half-rack) |
| Weight | 2.2 lbs (1 kg) |
| Power Supply | 12 V DC, 500 mA (via external adapter or Shure chassis) |
| Frequency Range | 470–952 MHz (depending on regional variant) |
| Gain | 12 dB typical |
| Input/Output Impedance | 50 ohms |
| Antenna Bias Voltage | 10–15 V DC per antenna input (for active antennas) |
| Number of Antenna Inputs | 2 (BNC female) |
| Number of Receiver Outputs | 6 (BNC female, 4 daisy-chainable) |
| Front Panel Indicators | Power LED, overload LED per antenna |
| Mounting | Rack-mount with included brackets (1U, half-rack width) |
| Operating Temperature | −20°C to +50°C (−4°F to +122°F) |
| Materials | Steel chassis, aluminum faceplate |
| Included Accessories | Power supply, rack-mount ears, BNC cables (qty 4) |
| Maintenance | Wipe with a soft dry cloth; do not use liquids or solvents. |
| Safety Certification | CE, FCC Part 15 |
| Repair and Spare Parts | Contact Shure service or authorized dealers; no user-serviceable parts. |
Frequently Asked Questions - RA 6025 SHURE
What is the Shure RA 6025 used for?
The Shure RA 6025 is a remote antenna amplifier designed to boost and distribute RF signals from wireless microphones and IEM systems over longer cable runs, typically used in professional audio setups.
How many receivers can I connect to one RA 6025?
The RA 6025 has six BNC outputs for receivers. It can also be daisy-chained to additional units to support more receivers if needed.
Can I use active antennas with the RA 6025?
Yes, the RA 6025 provides DC bias voltage (10–15 V) on each antenna input to power active antennas such as Shure UA874 or similar.
How do I power the RA 6025?
It requires a 12 V DC power supply (included). Alternatively, it can be powered through a Shure chassis that provides DC voltage on the antenna cable (e.g., from a Shure ULXD receiver).
Is the RA 6025 compatible with all Shure wireless systems?
It is compatible with most Shure wireless systems operating in the UHF range (470–952 MHz), including ULX-D, QLX-D, SLX-D, and Axient Digital. Check frequency band compatibility before use.
How do I mount the RA 6025?
It comes with rack-mount ears for a standard 19-inch rack, occupying 1U of rack space (half-rack width). It can also be placed on a shelf or surface.
What do the front panel LEDs indicate?
The Power LED indicates that the unit is receiving power. The Overload LED (one per antenna input) lights up if the input RF signal is too strong, causing distortion.
Can I use the RA 6025 outdoors?
The RA 6025 is designed for indoor use only. It is not weatherproof. Use it in a dry, ventilated environment within the operating temperature range (-20°C to +50°C).
How do I clean the RA 6025?
Unplug the unit and wipe the exterior with a soft, dry cloth. Do not use any cleaning fluids, solvents, or abrasive materials.
What should I do if the RA 6025 stops working?
Check the power supply and cable connections. If the unit still fails, contact Shure technical support or an authorized service center. Do not open the device as it contains no user-serviceable parts.
User questions about RA 6025 SHURE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual RA 6025 - SHURE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RA 6025 by SHURE.
USER MANUAL RA 6025 SHURE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SHURE
Model : RA 6025
Category : Uncategorized