PLA1200 - Receiver Pyle - Free user manual and instructions
Find the device manual for free PLA1200 Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type de produit | Stereo Receiver |
| Puissance de sortie | 200W per channel (RMS) |
| Dimensions | 17.2 x 5.5 x 12.6 inches (43.7 x 14 x 32 cm) |
| Poids | 12.5 lbs (5.7 kg) |
| Alimentation | AC 110-240V, 50/60Hz |
| Consommation électrique | 400W maximum |
| Réponse en fréquence | 20Hz - 20kHz (±1dB) |
| Impédance des enceintes | 4-16 ohms |
| Entrées audio | 3x RCA, 1x AUX 3.5mm, 1x phono, 1x optical, 1x coaxial |
| Sorties audio | 2x speaker terminals, 1x subwoofer pre-out, 1x headphone |
| Radio intégrée | FM/AM tuner with 30 presets |
| Bluetooth | Yes, version 5.0 |
| Fonctions principales | Bluetooth streaming, AM/FM radio, phono input, multi-zone support |
| Entretien et nettoyage | Clean with dry soft cloth; avoid liquids and solvents |
| Sécurité | Do not expose to water or excessive heat; ensure proper ventilation |
| Pièces détachées et réparabilité | Contact Pyle support for replacement parts; repair by qualified technician |
| Informations générales | Home audio receiver with built-in Bluetooth and FM/AM tuner |
Frequently Asked Questions - PLA1200 Pyle
How do I connect my smartphone via Bluetooth?
Press the Bluetooth button on the front panel or remote. Enable Bluetooth on your phone and select PLA1200 from the list. Pairing is automatic.
What is the maximum power output?
The Pyle PLA1200 delivers 200W per channel RMS at 8 ohms, enough for most home speakers.
Can I connect a turntable?
Yes, there is a dedicated phono input for turntables with a moving magnet cartridge. No external phono preamp needed.
How to set up the FM radio?
Connect the included FM antenna to the FM antenna terminal. Press Tuner button, then use Auto Scan to find stations. Save presets by holding the numeric buttons.
My receiver won't turn on. What should I do?
Check the power cord connection and ensure the wall outlet works. Try the Power button on the front. If still off, check the fuse inside the unit (requires opening).
What is the warranty period?
Pyle offers a 1-year limited warranty from date of purchase. Register your product on the Pyle website for support.
Can I use this receiver with outdoor speakers?
Yes, but ensure the speakers have an impedance of 4-16 ohms and can handle the power. Use proper outdoor-rated wiring.
How do I clean the receiver?
Unplug the unit and use a soft, dry cloth to wipe the exterior. Do not use any liquid cleaners or spray directly.
What are the dimensions?
Approximately 17.2 x 5.5 x 12.6 inches (width x height x depth). It fits standard AV racks.
Does it support multiple zones?
Yes, the PLA1200 has A and B speaker outputs for dual-zone audio. You can play different sources in each zone.
User questions about PLA1200 Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual PLA1200 - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLA1200 by Pyle.
USER MANUAL PLA1200 Pyle
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pyle
Model : PLA1200
Category : Receiver