Reference 10001A - Receiver INFINITY - Free user manual and instructions
Find the device manual for free Reference 10001A INFINITY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio/Video Receiver |
| Brand | Infinity |
| Model | Reference 10001A |
| Dimensions (W x H x D) | 17.1 x 6.5 x 15.4 inches |
| Weight | 25.6 lbs |
| Power Output | 100W per channel (8 ohms, 20Hz-20kHz, 0.08% THD) |
| Frequency Response | 20Hz - 20kHz |
| Signal-to-Noise Ratio | 100dB |
| Inputs | 4 HDMI, 2 Optical, 2 Coaxial, Phono (MM), Analog RCA, USB |
| Outputs | HDMI (ARC), Subwoofer Pre-out, Speaker terminals (5.1) |
| Supported Audio Formats | Dolby Digital, DTS, PCM |
| Video Support | 4K pass-through, 3D |
| Bluetooth | Yes, version 4.2 |
| Remote Control | Included |
| Power Consumption | 400W (standby <0.5W) |
| Safety Features | Auto-standby, overload protection |
| Maintenance | Clean with dry cloth, avoid liquids |
| Repairability | User-replaceable fuses; contact service for internal issues |
Frequently Asked Questions - Reference 10001A INFINITY
How do I connect speakers to the Infinity Reference 10001A?
Connect speaker wires to the binding posts on the back. Ensure proper polarity: red to positive, black to negative. Use a 5.1 speaker setup for surround sound.
Why is there no sound from the receiver?
Check if the receiver is on the correct input source. Verify speaker connections and that the volume is not muted. Ensure the audio output from your source device is enabled.
How do I perform a factory reset?
Press and hold the 'Power' and 'Source' buttons simultaneously for 5 seconds until 'Reset' appears on the display. Release buttons to confirm.
Can I use Bluetooth headphones with this receiver?
No, the receiver's Bluetooth is for audio streaming from devices, not for headphone output. Use a wired headphone jack if available.
What is the maximum HDMI resolution supported?
The receiver supports 4K resolution at 60Hz with HDCP 2.2 pass-through for compatible sources.
How do I update the firmware?
Download the firmware from the Infinity support website onto a USB drive. Insert into the USB port, navigate to 'Setup' > 'Firmware Update', and follow on-screen instructions.
The remote control is not working. What should I do?
Replace the batteries with fresh ones. Ensure there are no obstructions between the remote and the receiver. If still not working, try resetting the remote by removing batteries and pressing all buttons for 2 seconds.
How do I clean the receiver?
Unplug the receiver. Use a soft, dry cloth to wipe the surface. Do not use any liquids or chemicals. For vents, use a vacuum with a brush attachment.
The receiver turns off automatically. Is this normal?
Yes, the auto-standby feature turns off the unit after 30 minutes of inactivity to save energy. You can disable this in the setup menu under 'Power Management'.
Where can I find the user manual?
The user manual is available for free download on notice-facile.com in PDF format. Visit the product page for Infinity Reference 10001A.
User questions about Reference 10001A INFINITY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Reference 10001A - INFINITY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Reference 10001A by INFINITY.
USER MANUAL Reference 10001A INFINITY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : INFINITY
Model : Reference 10001A
Category : Receiver