IDM-45SE - Dehumidifier Impecca - Free user manual and instructions
Find the device manual for free IDM-45SE Impecca in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dehumidifier |
| Brand | Impecca |
| Model | IDM-45SE |
| Dehumidification Capacity | 45 pints per day (at 80°F, 60% RH) |
| Coverage Area | Up to 1,500 sq ft |
| Water Tank Capacity | 8.5 pints (4 liters) |
| Dimensions (W x H x D) | 15.0 x 24.0 x 11.8 inches |
| Weight | 33 lbs |
| Power Supply | 115V, 60Hz |
| Power Consumption | 550W (max) |
| Refrigerant | R-410A |
| Functions | Continuous drain, auto-restart, digital display, timer, turbo mode |
| Control Type | Electronic digital control panel |
| Air Filter | Washable, permanent filter |
| Noise Level | 52 dB (low fan) |
| Energy Star Rated | Yes |
| Maintenance | Clean filter every 2 weeks; empty bucket or attach continuous drain |
| Safety Features | Auto-shutoff when bucket full, overload protection, tip-over switch |
| Spare Parts Available | Replacement filters, buckets, drain hose kits |
| Repairability | User-accessible filter and drain; service provided by qualified technicians |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - IDM-45SE Impecca
How do I set the desired humidity level on the Impecca IDM-45SE?
Press the Humidity Set button repeatedly to adjust between 30% and 80% RH. The digital display shows the current setting.
Why is my dehumidifier not collecting water?
Ensure the room temperature is above 41°F (5°C). The compressor may not run if the ambient humidity is below the set level. Check that the filter is clean and the bucket is properly seated.
How often should I clean the air filter?
Clean the filter every 2 weeks under normal use. More frequently in dusty conditions. Remove the filter, wash with warm water and mild soap, dry completely before reinserting.
Can I use a continuous drain hose?
Yes. Remove the bucket cover, attach a standard garden hose (3/4 inch) to the drain outlet, and route it to a floor drain. The hose must be downhill and not kinked.
What does the 'Auto Restart' function do?
After a power outage, the dehumidifier automatically resumes operation with the previous settings once power is restored.
Why does my unit display 'E2' error code?
The 'E2' code indicates a defrost sensor error. Unplug the unit for 5 minutes and restart. If the error persists, contact customer service for a replacement sensor.
Is the Impecca IDM-45SE suitable for a basement?
Yes, it is designed for basements up to 1,500 sq ft. Use the continuous drain option to avoid emptying the bucket frequently.
How do I clean the water bucket?
Empty the bucket, wash it with warm water and mild detergent. Do not use abrasive cleaners. Rinse well and dry before reinstalling.
Can I run the dehumidifier in a room with low temperature?
The dehumidifier operates best above 41°F (5°C). Below that, the coil may freeze and the unit will cycle into defrost mode, reducing efficiency.
What maintenance tasks are recommended?
Clean the filter every 2 weeks, empty and rinse the bucket monthly, check the drain hose for clogs, and wipe the exterior with a damp cloth. Annual professional inspection is advised.
User questions about IDM-45SE Impecca
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dehumidifier in PDF format for free! Find your manual IDM-45SE - Impecca and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IDM-45SE by Impecca.
USER MANUAL IDM-45SE Impecca
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Impecca
Model : IDM-45SE
Category : Dehumidifier