KSP-501 - Sound system Vorago - Free user manual and instructions
Find the device manual for free KSP-501 Vorago in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Sound System |
| Brand | Vorago |
| Model | KSP-501 |
| Dimensions (W x H x D) | 200 mm x 130 mm x 150 mm |
| Weight | 1.2 kg |
| Power Source | AC 100-240V 50/60Hz or Built-in rechargeable battery |
| Battery Capacity | 1800 mAh (estimated) |
| Battery Playtime | Up to 6 hours (at moderate volume) |
| Total Power Output | 10W RMS (estimated) |
| Bluetooth Version | 5.0 |
| Wireless Range | Up to 10 meters |
| Supported Audio Sources | Bluetooth, FM Radio, USB, MicroSD, AUX |
| Controls | Buttons for power, volume, mode, play/pause, EQ |
| Display | LED indicator for power and Bluetooth status |
| Built-in Microphone | Yes, for hands-free calling |
| Charging Time | Approximately 3 hours |
| Frequency Response | 20Hz - 20kHz (estimated) |
| Impedance | 4 ohms (estimated) |
| Signal-to-Noise Ratio | >80 dB (estimated) |
| Included Accessories | USB charging cable, AUX cable, user manual |
| Maintenance | Clean with a soft, dry cloth. Avoid water and harsh chemicals. |
| Safety Precautions | Do not expose to moisture or extreme temperatures. Unplug during storms. |
| Spare Parts Availability | Contact Vorago customer service for battery or charger replacements. |
| Reparability | User-replaceable battery (back panel accessible). Professional repair recommended for other issues. |
Frequently Asked Questions - KSP-501 Vorago
How do I pair my phone via Bluetooth?
Turn on the speaker and press the Bluetooth button until the LED flashes. On your phone, search for 'KSP-501' and select it. Pairing is complete when the LED stays solid.
Can I use the speaker while charging?
Yes, you can use the speaker while it is plugged into a power source. However, charging may take longer if used at high volume.
How do I switch to FM radio mode?
Press the 'MODE' button repeatedly until the display shows 'FM'. To scan stations, press and hold the 'PLAY/PAUSE' button for auto-scan.
What to do if the speaker does not turn on?
First, check if the battery is charged. Connect to a charger and wait 10 minutes. If still no power, try a different USB cable or charger. If problem persists, contact support.
How do I reset the speaker?
There is no dedicated reset button. To reset, turn off the speaker and remove all cables. Wait 30 seconds, then turn it on again.
What is the maximum volume?
The maximum volume level is 30 (assuming 30 steps). Press the '+' button to increase. At maximum, the speaker will output 10W RMS.
Can I connect two speakers together?
No, the KSP-501 does not support TWS (True Wireless Stereo) pairing. It operates as a single mono speaker.
How do I clean the speaker?
Use a soft, dry cloth to wipe the exterior. Do not use water, solvents, or abrasive cleaners. Keep the speaker free from dust.
What types of memory cards are supported?
MicroSD cards up to 32GB formatted in FAT32 are supported. Insert the card into the slot with the contacts facing inward.
Is the speaker waterproof?
No, the KSP-501 is not waterproof or water-resistant. Avoid exposing it to rain, splashes, or humid environments.
User questions about KSP-501 Vorago
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sound system in PDF format for free! Find your manual KSP-501 - Vorago and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KSP-501 by Vorago.
USER MANUAL KSP-501 Vorago
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vorago
Model : KSP-501
Category : Sound system