LED-1002HD2 - Loudspeaker Tote Vision - Free user manual and instructions
Find the device manual for free LED-1002HD2 Tote Vision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Loudspeaker |
| Model | LED-1002HD2 |
| Brand | Tote Vision |
| Dimensions (approx.) | 250 x 150 x 100 mm |
| Weight | 2.5 kg |
| Power Output | 20 W RMS |
| Frequency Response | 80 Hz - 20 kHz |
| Bluetooth Version | 5.0 |
| Battery Capacity | 4000 mAh |
| Charging Time | 4 hours |
| Playback Time | Up to 8 hours |
| Audio Inputs | AUX (3.5mm), USB |
| Headphone Output | Yes, 3.5mm |
| Controls | Volume, Power, Bluetooth Pairing |
| Microphone | Built-in (for hands-free calls) |
| Water Resistance | IPX4 (splash-proof) |
| Color | Black |
| Included Accessories | Remote control, USB charging cable, AUX cable |
| Usage | Indoor and outdoor portable use |
| Cleaning | Wipe with a soft dry cloth |
Frequently Asked Questions - LED-1002HD2 Tote Vision
How do I pair my device via Bluetooth?
Turn on the speaker and press the Bluetooth button until the LED blinks. On your phone, search for 'Tote Vision LED-1002HD2' and select it. The LED will turn solid when connected.
How long does the battery last?
The built-in 4000 mAh battery provides up to 8 hours of playback at moderate volume. Actual battery life depends on volume level and content.
How do I charge the speaker?
Use the included USB charging cable to connect the speaker to a standard USB power adapter (5V/2A). The LED will indicate charging status. Full charge takes about 4 hours.
Can I use the speaker while charging?
Yes, you can use the speaker while it is plugged in and charging. However, this may slightly extend the charging time.
What should I do if the volume is too low?
First, increase the volume on both the speaker and your connected device. Also, ensure that the audio source is playing at a high volume. If the issue persists, try resetting the speaker.
How do I reset the speaker?
To reset, press and hold the power button for 10 seconds until the device powers off and restarts. You may need to re-pair with your device.
Is the speaker water-resistant?
Yes, the speaker has an IPX4 rating, meaning it is splash-proof. It can withstand light rain and splashes but should not be submerged or exposed to heavy rain.
Can I connect multiple speakers together?
This model does not support daisy-chaining or party mode. Only one speaker can be connected to a device at a time.
How do I clean the speaker?
Use a soft, dry cloth to wipe the exterior. Do not use any abrasive cleaners or solvents. For the grille, use a soft brush to remove dust gently.
What should I do if the speaker does not turn on?
First, charge the speaker for at least 30 minutes. If it still doesn't turn on, try a different USB cable and power adapter. If the issue continues, contact Tote Vision customer support.
User questions about LED-1002HD2 Tote Vision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual LED-1002HD2 - Tote Vision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED-1002HD2 by Tote Vision.
USER MANUAL LED-1002HD2 Tote Vision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Tote Vision
Model : LED-1002HD2
Category : Loudspeaker