SCM-660 - Microphone Senal - Free user manual and instructions
Find the device manual for free SCM-660 Senal in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Condenser Microphone |
| Polar Pattern | Cardioid |
| Frequency Response | 20 Hz – 20 kHz |
| Sensitivity | -38 dB ± 2 dB (1 kHz, 1 Pa) |
| Impedance | 150 Ω |
| Maximum SPL | 130 dB (1% THD) |
| Signal-to-Noise Ratio | 78 dB |
| Power Requirement | 48V Phantom Power (IEC 61938) |
| Dimensions (with mount) | 1.9 x 5.7 inches (48 x 145 mm) |
| Weight (with mount) | 0.35 lb (160 g) |
| Connector | 3-pin XLR male |
| Included Accessories | Shock mount, foam windscreen |
| Main Functions | Studio recording, vocal/instrument capture, live sound |
| Clean and Care | Wipe exterior with dry cloth; avoid moisture and dust; use protective case when storing |
| Safety Warnings | Do not expose to extreme temperatures or liquids; use only with specified phantom power |
| Spare Parts & Reparability | Contact authorized service center; no user-serviceable parts inside |
| General Information | Brand: Senal; Model: SCM-660; Category: Microphone |
Frequently Asked Questions - SCM-660 Senal
How do I connect the Senal SCM-660 microphone to my audio interface?
Use a standard XLR cable to connect the microphone's 3-pin XLR output to an audio interface or mixer input that provides 48V phantom power. Turn on phantom power from the interface.
Does the SCM-660 require phantom power?
Yes, this is a condenser microphone that requires +48V phantom power. It will not work without it.
What polar pattern does the SCM-660 have?
The SCM-660 features a cardioid polar pattern, which captures sound from the front and rejects noise from the sides and rear.
Can I use the SCM-660 for recording vocals?
Absolutely. Its cardioid pattern and wide frequency response make it ideal for vocals, voiceovers, and instruments like acoustic guitar or piano.
What is included in the box with the SCM-660?
The package includes the microphone, a shock mount, a foam windscreen, and a carrying case (if applicable). Check the manual for exact contents.
How do I clean the Senal SCM-660 microphone?
Use a dry, soft cloth to wipe the exterior. Never use liquids or cleaners. Store in a dry, dust-free environment when not in use.
What is the frequency response of the SCM-660?
The frequency response is 20 Hz to 20 kHz, covering the full audible range for detailed sound reproduction.
Is the SCM-660 compatible with a standard boom stand?
Yes, the shock mount has a standard 5/8-inch thread and can be attached to most microphone stands or booms.
Can I replace the cable or grille if damaged?
The microphone uses a detachable XLR cable (not included). The grille is attached and not user-replaceable. For repairs, contact Senal support or an authorized service center.
Why is there no sound from my SCM-660?
Check that phantom power is enabled on your interface, the XLR cable is fully plugged in, and the gain is set appropriately. Also ensure the microphone is not muted.
User questions about SCM-660 Senal
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microphone in PDF format for free! Find your manual SCM-660 - Senal and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SCM-660 by Senal.
USER MANUAL SCM-660 Senal
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Senal
Model : SCM-660
Category : Microphone