FE1A10GR - Fire Extinguisher FIRST ALERT - Free user manual and instructions
Find the device manual for free FE1A10GR FIRST ALERT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fire Extinguisher |
| Brand | First Alert |
| Model | FE1A10GR |
| Fire Rating | 1-A:10-B:C |
| Extinguishing Agent | Dry Chemical (Monoammonium Phosphate) |
| Height | 12.5 inches (31.8 cm) |
| Width | 4.5 inches (11.4 cm) |
| Depth | 4.5 inches (11.4 cm) |
| Weight | 2.75 lbs (1.25 kg) |
| Discharge Time | Approximately 8-10 seconds |
| Operating Range | 5-8 feet (1.5-2.4 m) |
| Operating Temperature | 40°F to 120°F (4°C to 49°C) |
| Mounting Bracket | Included |
| Pressure Gauge | Yes, easy-to-read |
| Certification | UL Listed |
| Maintenance | Check pressure monthly; recharge after use or if pressure is low |
| Rechargeable | Yes, by a certified professional |
| Suitable for Fires | Wood, paper, cloth (Class A); flammable liquids (Class B); electrical equipment (Class C) |
| Warranty | Limited 10-year warranty |
Frequently Asked Questions - FE1A10GR FIRST ALERT
What does the fire rating 1-A:10-B:C mean?
It indicates the extinguisher's effectiveness: 1-A (covers Class A fires like wood and paper), 10-B (covers Class B fires like flammable liquids up to 10 sq ft), and C (safe for electrical fires).
How do I check if the extinguisher is properly pressurized?
Look at the pressure gauge on the handle. The needle should be in the green zone. If it's in the red, the extinguisher needs recharging or replacement.
How often should I inspect the fire extinguisher?
Inspect monthly. Check the pressure gauge, ensure the pin is intact, and that the extinguisher is not damaged or corroded.
Can I reuse the extinguisher after partial discharge?
No, even if only partially used, the extinguisher must be recharged by a professional service provider. It will not hold pressure for future use.
How do I operate the fire extinguisher?
Remember PASS: Pull the pin, Aim at the base of the fire, Squeeze the handle, and Sweep from side to side. Stand 6-8 feet away.
What should I do if the extinguisher is discharged?
Replace or have it recharged immediately. Even if not completely empty, the agent may settle; recharge is required. Check local fire equipment suppliers.
How long does the extinguisher last before expiration?
The extinguisher has a 10-year limited warranty and should be replaced after 12 years from manufacture date or if it shows signs of damage.
Where should I mount the extinguisher?
Mount it in an easily accessible location, away from potential fire sources, and where it is visible. Ensure it is not obstructed. Use the included bracket.
Can I use this extinguisher on grease fires?
Yes, it is rated for Class B fires (flammable liquids) including grease. However, for kitchen fires, a K-class extinguisher is preferred. Always prioritize safety.
Is the extinguisher safe for use on electrical equipment?
Yes, the C rating means it is suitable for electrical fires. The dry chemical is non-conductive when discharged.
User questions about FE1A10GR FIRST ALERT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fire Extinguisher in PDF format for free! Find your manual FE1A10GR - FIRST ALERT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FE1A10GR by FIRST ALERT.
USER MANUAL FE1A10GR FIRST ALERT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FIRST ALERT
Model : FE1A10GR
Category : Fire Extinguisher