Stealthbox SB-GM-CAMCONV/10W1v3 - Subwoofer JL Audio - Free user manual and instructions
Find the device manual for free Stealthbox SB-GM-CAMCONV/10W1v3 JL Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Custom-Fit Subwoofer Enclosure |
| Brand | JL Audio |
| Model | Stealthbox SB-GM-CAMCONV/10W1v3 |
| Driver | JL Audio 10W1v3 (10-inch) |
| Impedance | 4 ohms |
| Power Handling (RMS) | 300 Watts |
| Peak Power Handling | 600 Watts |
| Frequency Response | 30 Hz - 200 Hz |
| Sensitivity | 84 dB (1W/1m) |
| Enclosure Material | Hand-laid Fiberglass |
| Enclosure Finish | Black Carpet Covering |
| Vehicle Fitment | Select GM Trucks/SUVs (2007-2013 Silverado/Sierra, etc.) |
| Installation | Vehicle-Specific Custom Fit, No Trunk Space Loss |
| Dimensions (W x H x D) | 15.5 x 13.0 x 8.5 inches |
| Weight | 22.5 lbs |
| Warranty | 2 Years (Limited) |
| Included Accessories | Mounting Hardware, Instruction Manual |
| Recommended Amplifier Power (RMS) | 200-400 Watts at 4 ohms |
| Voice Coil Configuration | Single 4-ohm |
Frequently Asked Questions - Stealthbox SB-GM-CAMCONV/10W1v3 JL Audio
Which vehicles is the Stealthbox SB-GM-CAMCONV/10W1v3 designed for?
This Stealthbox is designed for select General Motors trucks and SUVs, typically 2007-2013 Chevrolet Silverado, GMC Sierra, and similar models with a specific cabin layout. It fits behind the rear seat or in a designated corner without losing cargo space.
What is the impedance of the built-in subwoofer?
The subwoofer is a single 4-ohm voice coil configuration, making it compatible with most mono amplifiers rated at 4 ohms.
How much power can the Stealthbox handle?
The 10W1v3 driver has an RMS power rating of 300 Watts and a peak handling of 600 Watts. JL Audio recommends using an amplifier delivering 200-400 Watts RMS at 4 ohms for optimal performance.
Can the Stealthbox be installed without professional help?
While it is a vehicle-specific fit, some mechanical skill is required. The enclosure typically bolts into existing mounting points, but you may need to remove trim panels. Professional installation is recommended to ensure proper fit and wiring.
What is the frequency response of the Stealthbox SB-GM-CAMCONV/10W1v3?
The frequency response ranges from 30 Hz to 200 Hz, providing deep, accurate bass reproduction suitable for music and movies.
Does the Stealthbox require an external amplifier?
Yes, this is a passive subwoofer enclosure. It requires an external amplifier to power the subwoofer. The enclosure does not include any amplification.
What materials is the Stealthbox enclosure made of?
The enclosure is constructed from hand-laid fiberglass for strength and rigidity, covered with a black carpet finish to match factory interiors.
How do I clean and maintain the Stealthbox?
Wipe the carpet cover gently with a damp cloth if needed. Avoid using harsh chemicals. Keep the subwoofer cone and surround dry. Check mounting bolts periodically for tightness.
What is the warranty on the Stealthbox SB-GM-CAMCONV/10W1v3?
JL Audio offers a limited 2-year warranty covering defects in materials and workmanship from the original purchase date. Register the product online for service.
Can I replace the subwoofer if it fails?
Yes, the subwoofer is replaceable. JL Audio recommends using an identical 10W1v3 driver to maintain acoustic performance. Contact an authorized dealer for replacement parts.
User questions about Stealthbox SB-GM-CAMCONV/10W1v3 JL Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual Stealthbox SB-GM-CAMCONV/10W1v3 - JL Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Stealthbox SB-GM-CAMCONV/10W1v3 by JL Audio.