ADP-AES3-2X2 - Network card / adapter Monacor - Free user manual and instructions
Find the device manual for free ADP-AES3-2X2 Monacor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Card / Adapter (AES3 Audio Interface) |
| Model | ADP-AES3-2X2 |
| Brand | Monacor |
| Supported Audio Format | AES/EBU (AES3) |
| Number of Channels | 2 Inputs / 2 Outputs |
| Connector Type | XLR (3-pin) for AES3 |
| Network Interface | Ethernet (RJ45) |
| Power Supply | External 12V DC (adapter included) |
| Dimensions (W x D x H) | Approx. 120 x 80 x 30 mm |
| Weight | Approx. 200 g |
| Sampling Rate Support | Up to 96 kHz |
| Bit Depth | Up to 24-bit |
| Operating Temperature | 0°C to 40°C |
| Compliance | RoHS, CE |
| Included Accessories | Power adapter, mounting brackets |
| Maintenance | Clean with dry cloth; avoid liquids |
| Safety | Use only supplied power adapter; disconnect when not in use |
| Repairability | No user-serviceable parts; contact Monacor support |
| Spare Parts Availability | Contact authorized dealer or Monacor service center |
Frequently Asked Questions - ADP-AES3-2X2 Monacor
What is the Monacor ADP-AES3-2X2 used for?
It converts AES/EBU digital audio signals to an Ethernet network for transport and control, allowing integration of professional audio equipment into IP-based systems.
How do I connect the ADP-AES3-2X2 to my mixer?
Connect the AES3 output of your mixer to the AES3 Input (XLR) on the adapter, and the Ethernet port to your network switch using a standard Cat5e/6 cable.
Does the device support PoE (Power over Ethernet)?
No, the ADP-AES3-2X2 requires an external 12V DC power supply, which is included in the package.
What is the maximum cable length for AES3?
For AES3 over XLR, maximum recommended cable length is about 100 meters at 48 kHz. For Ethernet, up to 100 meters using standard network cable.
Can I use the ADP-AES3-2X2 with Dante networks?
The device uses a proprietary AES3-to-Ethernet protocol. It is not directly Dante-compatible but can be bridged via a Dante-AES3 converter.
How do I configure the network settings on the adapter?
The unit may have a web interface accessible via its IP address. Refer to the manual for default IP and login credentials. Typically, DHCP is enabled by default.
What is the latency of the ADP-AES3-2X2?
The latency is typically less than 1 millisecond, suitable for live sound applications.
Can I daisy-chain multiple units?
Daisy-chaining is not supported. Each unit requires a direct Ethernet connection to a network switch.
How do I update the firmware?
Firmware updates are done via the web interface. Download the latest firmware from the Monacor support website and upload it through the device's maintenance page.
What should I do if the device is not recognized on the network?
Check the power LED and Ethernet link LED. Ensure the network cable is securely connected. Try a different port on the switch or a direct connection to a computer. If using DHCP, check your router's client list for the device's IP.
User questions about ADP-AES3-2X2 Monacor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network card / adapter in PDF format for free! Find your manual ADP-AES3-2X2 - Monacor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ADP-AES3-2X2 by Monacor.
USER MANUAL ADP-AES3-2X2 Monacor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Monacor
Model : ADP-AES3-2X2
Category : Network card / adapter