KM 3464 G - Cooker MIELE - Free user manual and instructions
Find the device manual for free KM 3464 G MIELE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Gas Hob |
| Brand | Miele |
| Model | KM 3464 G |
| Energy Type | Natural Gas / LPG (convertible) |
| Number of Burners | 4 |
| Burner Types | 1 x High-output, 3 x Standard |
| Dimensions (W x D) | 560 x 500 mm |
| Cutout Dimensions (W x D) | 490 x 470 mm |
| Net Weight | Approx. 12 kg |
| Power Supply | 220-240 V / 50-60 Hz (for ignition) |
| Gas Connection | G1/2" rear |
| Ignition | Automatic electric ignition (battery or mains) |
| Safety Features | Flame failure safety device on each burner |
| Material | Stainless steel with glass ceramic panel |
| Pan Supports | Cast iron, removable |
| Cleaning | Removable burner caps and pan supports for dishwasher |
| Warranty | 2 years (depending on region) |
| Included Accessories | Installation kit, gas conversion nozzles |
Frequently Asked Questions - KM 3464 G MIELE
How do I ignite the burners?
Press and turn the corresponding knob to the full flame symbol while holding down. The automatic ignition will spark. Keep pressed for a few seconds after flame appears to activate the flame failure safety device.
What type of gas is required?
The hob is factory-set for natural gas. It can be converted to LPG (propane/butane) using the included conversion nozzles. Refer to the manual for detailed conversion instructions.
Can I use any cookware on this hob?
Yes, the hob is compatible with all types of cookware suitable for gas cooking, including stainless steel, cast iron, and copper. Ensure cookware is stable and not oversized.
How do I clean the hob?
Allow the hob to cool. Remove the pan supports and burner caps — they are dishwasher safe. Wipe the stainless steel surface with a damp cloth and mild detergent. Avoid abrasive cleaners.
What should I do if a burner fails to ignite?
Check that the burner cap is correctly seated and dry. Ensure the gas supply is turned on. If the ignition spark is weak, replace the igniter battery (located under the control panel) or check mains connection.
Is professional installation required?
Yes, installation must be carried out by a qualified technician according to local gas safety regulations. The hob must be installed with proper ventilation and gas shut-off valve.
What are the cutout dimensions for installation?
The required cutout dimensions are 490 mm wide x 470 mm deep. Ensure a minimum clearance of 50 mm from back and side walls.
Can I use the hob with a gas cylinder?
Yes, after conversion to LPG, the hob can be used with a gas cylinder. Ensure the regulator matches the pressure specified in the manual (typically 30 mbar for butane, 50 mbar for propane).
How do I adjust the minimum flame setting?
With the burner lit, turn the knob to the minimum flame position. Use a small flathead screwdriver to adjust the bypass screw on the gas valve to achieve a stable low flame.
What does the flame failure safety device do?
It automatically shuts off the gas supply if the flame goes out accidentally (e.g., due to liquid spillage). This prevents gas leaks and ensures safe operation.
User questions about KM 3464 G MIELE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Cooker in PDF format for free! Find your manual KM 3464 G - MIELE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KM 3464 G by MIELE.
USER MANUAL KM 3464 G MIELE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MIELE
Model : KM 3464 G
Category : Cooker