NF650iSLIT-A - Motherboard ECS - Free user manual and instructions
Find the device manual for free NF650iSLIT-A ECS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motherboard |
| Brand | ECS |
| Model | NF650iSLIT-A |
| Form Factor | ATX (12.0 x 9.6 inches / 30.5 x 24.4 cm) |
| Weight | Approximately 1.5 kg (with accessories) |
| Power Supply | ATX 24-pin main connector, 4-pin/8-pin CPU connector |
| CPU Socket | LGA775 |
| Supported CPUs | Intel Core 2 Duo, Core 2 Quad, Pentium D, Celeron D |
| Chipset | NVIDIA nForce 650i SLI |
| Memory Slots | 4 x DDR2 DIMM (dual-channel, up to 8GB) |
| Expansion Slots | 2 x PCIe x16 (SLI ready), 2 x PCIe x1, 2 x PCI |
| Storage Interfaces | 4 x SATA 3.0 Gbps, 1 x IDE (PATA) |
| USB Ports | 8 x USB 2.0 (4 rear, 4 via headers) |
| LAN | Gigabit Ethernet (Realtek RTL8111B) |
| Audio | 7.1-channel HD audio (Realtek ALC883) |
| BIOS | AMI BIOS, 8 Mbit Flash ROM |
| Maintenance & Cleaning | Use compressed air to remove dust; avoid liquids and abrasive materials |
| Safety | ESD precautions recommended; disconnect power before installation |
| Spare Parts & Repairability | Non-user-serviceable; replace entire board if faulty |
| General Information | Supports NVIDIA SLI technology for dual graphics cards |
Frequently Asked Questions - NF650iSLIT-A ECS
What CPU socket does the ECS NF650iSLIT-A use?
The motherboard uses an LGA775 socket, compatible with Intel Core 2 Duo, Core 2 Quad, Pentium D, and Celeron D processors.
How much memory can I install on this motherboard?
You can install up to 8GB of DDR2 RAM across four DIMM slots, supporting dual-channel configurations.
Does the NF650iSLIT-A support SLI?
Yes, it features two PCIe x16 slots that support NVIDIA SLI technology for connecting two compatible graphics cards.
What type of power connector does the motherboard require?
It requires a standard 24-pin ATX power connector and an additional 4-pin or 8-pin CPU power connector.
How do I update the BIOS on the NF650iSLIT-A?
Download the latest BIOS from the ECS support website, copy it to a USB drive, and use the AMI BIOS update utility built into the BIOS setup.
What is the maximum supported FSB?
The motherboard supports a front-side bus (FSB) of up to 1333 MHz with compliant processors.
How many SATA ports are available?
There are 4 SATA 3.0 Gbps ports for connecting hard drives or SSDs.
Can I use DDR3 RAM with this motherboard?
No, this motherboard only supports DDR2 memory. DDR3 is not compatible.
Does the motherboard have integrated graphics?
No, there is no integrated graphics; you must install a dedicated graphics card in one of the PCIe x16 slots.
Where can I find the manual for the NF650iSLIT-A?
The manual is available for download on the ECS support website or via the product page on notice-facile.com.
User questions about NF650iSLIT-A ECS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motherboard in PDF format for free! Find your manual NF650iSLIT-A - ECS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NF650iSLIT-A by ECS.
USER MANUAL NF650iSLIT-A ECS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ECS
Model : NF650iSLIT-A
Category : Motherboard