NM70-TI/1037U - Motherboard ECS - Free user manual and instructions
Find the device manual for free NM70-TI/1037U ECS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motherboard |
| Model | NM70-TI/1037U |
| Brand | ECS |
| Form Factor | Mini-ITX |
| Dimensions (W x D) | 17.0 cm x 17.0 cm |
| Weight | Approx. 0.5 kg |
| CPU Socket | BGA1023 (soldered Intel Celeron 1037U) |
| Processor | Intel Celeron 1037U dual-core 1.8 GHz |
| Chipset | Intel NM70 |
| Memory Type | DDR3 SO-DIMM, 2 slots, max 16 GB |
| Memory Speed | 1333/1600 MHz |
| Expansion Slots | 1 x Mini PCIe (half size), 1 x PCIe x1 |
| Storage Interfaces | 2 x SATA 3Gb/s |
| USB Ports | 2 x USB 3.0, 6 x USB 2.0 (via headers) |
| Video Outputs | 1 x VGA, 1 x HDMI |
| Audio Codec | Realtek ALC662 6-channel HD Audio |
| LAN | Realtek RTL8111E Gigabit Ethernet |
| Power Supply | 24-pin ATX + 4-pin ATX 12V |
| Power Consumption (TDP) | About 35W |
| Operating Temperature | 0°C to 60°C |
| Operating Humidity | 20% to 80% non-condensing |
| Maintenance & Cleaning | Use compressed air for dust; avoid liquid cleaners |
| Safety | ESD precautions; disconnect power before installation |
| Spare Parts & Repair | Contact ECS support; no user-serviceable parts |
Frequently Asked Questions - NM70-TI/1037U ECS
What CPU is integrated on the ECS NM70-TI/1037U motherboard?
The motherboard has a soldered Intel Celeron 1037U dual-core processor with a base clock of 1.8 GHz.
What type of RAM does the NM70-TI/1037U support?
It supports DDR3 SO-DIMM modules, up to 16GB total across two slots, at speeds of 1333 or 1600 MHz.
Does this motherboard have a PCI Express slot for a graphics card?
It has a PCIe x1 slot (not x16), so it cannot accommodate a standard discrete graphics card. The CPU integrates Intel HD Graphics for video output.
How can I update the BIOS on the ECS NM70-TI/1037U?
Download the latest BIOS from the ECS website, extract the file to a FAT32 USB drive, and use the EZ Flash tool in the BIOS setup.
What operating systems are compatible?
It supports Windows 7, 8, 10 (32/64-bit) and various Linux distributions. Ensure AHCI mode is set in BIOS for SSDs.
Is the ECS NM70-TI/1037U fanless?
The board does not require a CPU fan since the processor is low-power, but it has a CPU fan header if an active cooler is needed. There is no chipset fan.
How do I connect the front panel wires?
Refer to the manual for the exact pin layout. Typically, connect power switch, reset, and LEDs to the front panel header (FP1) aligning with the silkscreen labels.
Does this motherboard support SSD?
Yes, it can use a 2.5-inch SATA SSD connected to one of the two SATA 3Gb/s ports.
My system doesn't power on. What should I check?
Verify the 24-pin ATX and 4-pin 12V power connectors are firmly attached, the power supply is functional, and the front panel power switch is correctly wired.
Can I overclock the CPU on this motherboard?
No, the Intel Celeron 1037U is not unlocked and the NM70 chipset does not support overclocking. The BIOS is limited to standard settings.
User questions about NM70-TI/1037U ECS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motherboard in PDF format for free! Find your manual NM70-TI/1037U - ECS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NM70-TI/1037U by ECS.
USER MANUAL NM70-TI/1037U ECS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ECS
Model : NM70-TI/1037U
Category : Motherboard