32AT4 - Loudspeaker James - Free user manual and instructions
Find the device manual for free 32AT4 James in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bookshelf Loudspeaker |
| Brand | James |
| Model | 32AT4 |
| Dimensions (H x W x D) | 32 cm x 18 cm x 25 cm |
| Weight | 5.6 kg per speaker |
| Power Handling (RMS) | 50 W |
| Frequency Response | 50 Hz - 20 kHz |
| Impedance | 8 ohms |
| Sensitivity | 89 dB |
| Drivers | 1 x 1-inch tweeter, 1 x 5.25-inch woofer |
| Enclosure Type | Bass reflex (rear ported) |
| Input | Binding posts (bi-wire capable) |
| Recommended Amplifier Power | 20 - 100 W RMS per channel |
| Placement | Bookshelf or stand-mounted |
| Finish | Black vinyl wrap |
| Grille | Removable magnetic grille |
| Warranty | 2 years |
| Cleaning Instructions | Wipe with a dry, soft cloth. Do not use water or solvents. |
| Safety | Do not expose to moisture or direct sunlight. |
| Spare Parts Availability | Tweeter and woofer available via authorized service centers. |
| Repairability | Drivers and crossovers are replaceable by a qualified technician. |
Frequently Asked Questions - 32AT4 James
How do I connect the James 32AT4 to my amplifier?
Use speaker cables with banana plugs or bare wire. Connect the positive (+) and negative (-) terminals on the speaker to the corresponding terminals on your amplifier. Ensure the amplifier is turned off during connection.
What is the recommended placement for optimal sound?
Place the speakers on a sturdy bookshelf or stands, at ear level when seated. Keep them at least 20 cm away from the wall to avoid bass boom. Angle them slightly toward the listening position.
Can I use the 32AT4 in a home theater setup?
Yes, they work well as front or rear speakers in a stereo or surround system. Use a subwoofer for deeper bass, as these are bookshelf speakers.
How do I clean the speakers?
Use a dry, lint-free cloth to gently wipe the cabinet and grille. Do not use any liquids, sprays, or abrasive cleaners. For the grille, a soft brush can remove dust.
What should I do if there is no sound?
Check all connections and ensure the amplifier is powered on and not muted. Verify the speaker wires are securely connected and not shorted. Test with another speaker to isolate the issue.
Are the speakers magnetically shielded?
No, the James 32AT4 are not magnetically shielded. Keep them at least 30 cm away from CRT televisions or other magnetic sensitive devices to avoid interference.
Can I bi-wire or bi-amp these speakers?
Yes, the binding posts are bi-wire capable. Remove the jumpers between the terminals to bi-wire or bi-amp. Ensure correct polarity.
What is the maximum power handling?
The speakers handle up to 100 W RMS short-term. For normal listening, 20-50 W is sufficient. Exceeding the limit may damage the drivers.
How do I wall-mount the 32AT4?
These speakers do not have built-in keyhole mounts. Use a universal bookshelf speaker wall mount bracket that attaches to the rear screw inserts, if available. Ensure the bracket supports the weight.
Where can I find spare parts or service?
Contact James customer service or an authorized service center. Spare tweeters and woofers can be ordered through them for DIY repair. Always turn off the system before attempting any repair.
User questions about 32AT4 James
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual 32AT4 - James and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 32AT4 by James.
USER MANUAL 32AT4 James
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : James
Model : 32AT4
Category : Loudspeaker