WPD-VC10K - Uncategorized Atlas Sound - Free user manual and instructions
Find the device manual for free WPD-VC10K Atlas Sound in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall Plate Volume Control |
| Model | WPD-VC10K |
| Brand | Atlas Sound |
| Impedance | 10k ohms |
| Power Handling | 10W RMS |
| Number of Channels | 1 (mono) |
| Control Type | Rotary knob with off position |
| Mounting | Standard Decora wall plate (single gang) |
| Dimensions (Plate) | 4.5 x 2.75 x 0.3 inches (114 x 70 x 7.6 mm) |
| Depth Behind Wall | 1.2 inches (30.5 mm) |
| Weight | 0.2 lbs (90 g) |
| Material | Thermoplastic faceplate, steel internal bracket |
| Color | White (standard), paintable |
| Connections | Screw terminals (accepts up to 14 AWG wire) |
| Frequency Response | 20 Hz - 20 kHz (passive) |
| Attenuation Range | 0 to -∞ dB (full off) |
| Compatibility | 70V/100V distributed audio systems, low impedance (4-16 ohm) |
| Safety Rating | UL listed, CE compliant |
| Installation | Mount in standard electrical box (not included) |
| Maintenance | Wipe with dry cloth; no internal serviceable parts |
| Warranty | 5 years |
Frequently Asked Questions - WPD-VC10K Atlas Sound
What is the Atlas Sound WPD-VC10K?
The WPD-VC10K is a wall plate volume control designed for commercial audio systems. It allows you to adjust the volume of speakers in a zone.
What is the impedance of the WPD-VC10K?
The volume control has an impedance of 10k ohms, which means it is designed for constant voltage (70V/100V) distributed audio systems.
How many watts can the WPD-VC10K handle?
It can handle up to 10 watts RMS of audio power. Ensure the total speaker load does not exceed this rating.
What type of wiring does the WPD-VC10K use?
It uses screw terminals that accept solid or stranded wire up to 14 AWG. Common connection is two wires for input and two for output.
Can I use the WPD-VC10K with a standard home stereo?
Yes, it works with low impedance (4-16 ohm) systems, but check that the power rating matches your amplifier. It is optimized for 70V/100V distributed systems.
How do I install the WPD-VC10K?
Mount it in a standard single-gang electrical box. Connect the input wires from the amplifier to the 'IN' terminals and output wires to the speakers to the 'OUT' terminals.
Does the WPD-VC10K have an off position?
Yes, rotating the knob fully counterclockwise clicks to the off position, which disconnects the speaker from the amplifier.
What is the frequency response of the volume control?
Being a passive component, it has a flat response from 20 Hz to 20 kHz, ensuring no audible effect on sound quality.
How do I clean the WPD-VC10K?
Wipe the faceplate with a soft, dry cloth. Do not use water or cleaning solvents. For stubborn dirt, use a mild soap solution on a damp cloth and dry immediately.
Where can I find the manual for the WPD-VC10K?
The manual is available for free download on notice-facile.com in PDF format. It includes detailed installation instructions and wiring diagrams.
User questions about WPD-VC10K Atlas Sound
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual WPD-VC10K - Atlas Sound and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WPD-VC10K by Atlas Sound.
USER MANUAL WPD-VC10K Atlas Sound
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Atlas Sound
Model : WPD-VC10K
Category : Uncategorized