WT8HXM75NL - Tumble dryer SIEMENS - Free user manual and instructions
Find the device manual for free WT8HXM75NL SIEMENS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Model | WT8HXM75NL |
| Brand | Siemens |
| Dryer Type | Heat Pump Condenser |
| Capacity | 8 kg |
| Energy Efficiency Class | A+++ |
| Annual Energy Consumption | 200 kWh |
| Dimensions (H x W x D) | 842 x 598 x 613 mm |
| Weight | 50 kg |
| Power Consumption | 600 W |
| Noise Level | 62 dB(A) |
| Drying Programs | Cotton, Synthetics, Delicates, Wool, Mix, Shirts, Towels |
| Sensor Drying | Yes |
| Anti-Crease Function | Yes |
| Delay Start | Up to 24 hours |
| Child Lock | Yes |
| Overheating Protection | Yes |
| Self-Cleaning Condenser | Yes |
| Lint Filter Indicator | Yes |
| Water Tank Location | Front left drawer |
| Spare Parts Availability | Up to 10 years |
| Warranty | 2 years |
Frequently Asked Questions - WT8HXM75NL SIEMENS
How to clean the lint filter?
Open the door and pull the lint filter out from the door opening. Remove the lint by hand or with a vacuum cleaner. Rinse under running water if necessary, then dry thoroughly and reinsert. Perform after every drying cycle.
How to empty the water tank?
Pull out the water tank drawer on the front left. Open the cap and pour the water into a sink. Replace the cap and slide the drawer back in. The tank may fill after 2-3 cycles depending on humidity.
Why is my dryer not drying properly?
Check if the lint filter is clogged, the water tank is full, or the condenser needs cleaning. Also ensure the load is not too large or too wet. If error persists, consult the manual for error codes.
How to install the dryer?
Place on a stable, level surface near a power outlet. The room should be well-ventilated. Ensure the water tank can be accessed. For stacking with a washing machine, use the appropriate stacking kit (sold separately).
Can I stack the dryer on a washing machine?
Yes, but only with the Siemens stacking kit (model WTZ11100). This ensures stability and safety. Do not stack without the kit.
What is the energy consumption?
The annual energy consumption is approximately 200 kWh. Actual consumption depends on usage. It is energy efficiency class A+++.
How to fix error codes?
Common error codes: E:31 (water tank full), E:32 (lint filter), E:33 (condenser). Refer to the manual for full list. Most can be resolved by cleaning filters or emptying tank. If code persists, contact service.
How to use the delay start function?
Press the Delay Start button repeatedly to set the desired delay (1-24 hours). The dryer will start automatically so that the cycle ends at the set time. Close the door and press Start.
Is the dryer ventless?
Yes, it is a condenser dryer with heat pump technology. It does not require an external vent; water collects in the tank or can be connected to a drain hose.
How to maintain the condenser?
The self-cleaning condenser automatically rinses with condensed water. Manual cleaning is rarely needed. If performance drops, you can clean the condenser fins with a soft brush and rinse with water.
User questions about WT8HXM75NL SIEMENS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual WT8HXM75NL - SIEMENS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WT8HXM75NL by SIEMENS.
USER MANUAL WT8HXM75NL SIEMENS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SIEMENS
Model : WT8HXM75NL
Category : Tumble dryer