RT18DKXKQ07 - Refrigerator Roper - Free user manual and instructions
Find the device manual for free RT18DKXKQ07 Roper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Top-Freezer Refrigerator |
| Brand | Roper |
| Model | RT18DKXKQ07 |
| Total Capacity | 18 cu ft |
| Dimensions (H x W x D) | 66 x 30 x 30 inches |
| Weight | 150 lbs |
| Power Supply | 120 V, 60 Hz, 15 A |
| Energy Consumption | 450 kWh per year |
| Defrost Type | Automatic (frost-free) |
| Refrigerator Shelves | 3 adjustable spill-proof glass shelves |
| Freezer Shelves | 1 wire shelf, 1 door bin |
| Crisper Drawers | 2 humidity-controlled crispers |
| Door Storage | 4 adjustable door bins (refrigerator), 2 fixed door bins (freezer) |
| Ice Maker | Optional (kit available) |
| Temperature Control | Digital or dial control |
| Reversible Doors | Yes, reversible hinge |
| Leveling Legs | 2 front leveling legs |
| Door Alarm | No |
| Water Filter | Not included |
| Lighting | Incandescent bulb (refrigerator), LED (freezer) - replaceable |
| Parts and Repair | Whirlpool authorized parts; user-replaceable: shelves, bins, bulbs, water filter (if installed) |
Frequently Asked Questions - RT18DKXKQ07 Roper
What are the ideal temperature settings for the refrigerator and freezer?
Set the refrigerator temperature to 37-40°F (3-4°C) and the freezer to 0°F (-18°C). Use the dial or digital controls to adjust. Check with a thermometer for accuracy.
How do I change the refrigerator light bulb?
Unplug the refrigerator. Remove the light shield by pressing the tabs. Replace with an incandescent bulb of the same wattage (usually 40W). Reinstall the shield and plug the unit back in.
Why is my refrigerator running constantly?
Common causes: dirty condenser coils, door not sealing properly, high ambient temperature, or door left open. Clean coils with a brush every 6 months. Ensure the door gasket is clean and seals tightly.
How do I clean the condenser coils?
Unplug the refrigerator. Locate the coils at the back or bottom. Use a vacuum cleaner with a brush attachment or a coil cleaning brush to remove dust. Plug back in.
Can I reverse the door swing?
Yes, the doors are reversible. You will need a screwdriver and possibly a wrench. Follow the instructions in the manual to move the hinges to the opposite side. Some models require a kit.
How often should I replace the water filter?
If an ice maker or water dispenser is installed, replace the filter every 6 months or when the indicator light comes on. For models without a filter, no replacement is needed.
My ice maker is not producing ice. What should I do?
Check that the freezer temperature is below 10°F (-12°C). Ensure the water line is connected and the shutoff valve is open. If the ice maker is turned on, it may take 24 hours to produce the first batch. Clear any ice jams.
How do I defrost the freezer?
This model is frost-free. No manual defrosting is required. If you see frost buildup, it may indicate a door seal issue or frequent door openings. Ensure the door closes properly.
What are the recommended clearances for installation?
Allow at least 1 inch (2.5 cm) of clearance at the back, top, and sides for proper ventilation. Keep the refrigerator away from heat sources and direct sunlight.
Where can I find replacement parts?
Replacement parts such as shelves, bins, and bulbs can be ordered through Whirlpool authorized dealers or online retailers. Use the model number RT18DKXKQ07 to ensure compatibility.
User questions about RT18DKXKQ07 Roper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Refrigerator in PDF format for free! Find your manual RT18DKXKQ07 - Roper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RT18DKXKQ07 by Roper.