RNIVSR2 - Range hood Dacor - Free user manual and instructions
Find the device manual for free RNIVSR2 Dacor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | Dacor |
| Model | RNIVSR2 |
| Installation Type | Under-Cabinet |
| Width | 36 inches |
| Depth | 24 inches |
| Height | 18 inches |
| Weight | 80 lbs |
| Power Supply | 120V, 60Hz, 15A |
| Fan Speeds | 4 speeds |
| Airflow Capacity | 900 CFM |
| Noise Level | 50 dB (low speed) |
| Lighting | 2 x LED lights |
| Filter Type | Stainless steel baffle filters |
| Ducting | 6” round duct |
| Control Type | Push button |
| Recirculation Capability | Optional (charcoal filters required) |
| Warranty | 2 years parts and labor |
| Material | Stainless steel |
| Finish | Stainless steel |
Frequently Asked Questions - RNIVSR2 Dacor
How do I install the RNIVSR2 range hood?
Installation must be done by a qualified professional. The hood should be mounted at least 24 inches above the cooking surface. Ensure proper ducting is connected to a 6-inch round duct. Refer to the manual for detailed steps.
How should I clean the stainless steel filters?
Remove the baffle filters and wash them in warm soapy water or a dishwasher. Dry thoroughly before reinstalling. For tough grease, use a degreaser. Clean filters every month for optimal performance.
How do I replace the charcoal filters for recirculation mode?
If using the hood in recirculation mode, replace charcoal filters every 6 months. Remove the baffle filters, locate the charcoal filters behind them, and swap with new ones. Reinstall baffle filters.
Why is my range hood making noise?
Noise may be due to loose filters, debris in the fan, or improper installation. Check that filters are securely in place and clean. If noise persists, inspect the motor or contact customer support.
How do I reset the filter reminder indicator?
Press and hold the filter reset button for 3 seconds until the indicator light turns off. This resets the timer for the next filter cleaning cycle.
The LED lights are not working. What should I do?
First, ensure the hood is receiving power. If lights still don't work, the LED modules may need replacement. Turn off power, remove the light cover, and replace the module. Contact Dacor for compatible parts.
Can I use this hood without ducting?
Yes, the RNIVSR2 can be used in recirculation mode with charcoal filters. However, ducted mode is more efficient. For recirculation, purchase the charcoal filter kit and install as per manual.
What are the exact dimensions of this range hood?
The hood measures 36 inches wide, 24 inches deep, and 18 inches high. Ensure your cabinet opening matches these dimensions for a flush fit.
How do I adjust the fan speed?
Use the fan speed buttons on the control panel to cycle through 4 speeds: low, medium, high, and boost. The selected speed is indicated by LED lights.
Where can I find the user manual for this model?
The user manual is available for free download in PDF format on notice-facile.com. You can also contact Dacor customer service for a physical copy.
User questions about RNIVSR2 Dacor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual RNIVSR2 - Dacor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RNIVSR2 by Dacor.
USER MANUAL RNIVSR2 Dacor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Dacor
Model : RNIVSR2
Category : Range hood