QSFP-100G-SR4 - Network component Planet - Free user manual and instructions
Find the device manual for free QSFP-100G-SR4 Planet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 100GBASE-SR4 QSFP+ Transceiver Module |
| Form Factor | QSFP+ (Quad Small Form-factor Pluggable Plus) |
| Data Rate | 103.1 Gbps (4x 25.78 Gbps) |
| Wavelength | 850 nm |
| Reach | 70 m on OM3 MMF, 100 m on OM4 MMF |
| Connector Type | MPO/MTP (12-fiber female) |
| Electrical Interface | 38 contact edge connector (SFF-8436) |
| Power Consumption | ≤ 3.5 W |
| Operating Temperature | 0°C to 70°C |
| Storage Temperature | -40°C to 85°C |
| Compliance | IEEE 802.3bm, SFF-8436, SFF-8636, QSFP+ MSA |
| Digital Diagnostics | Yes (DDM/DOM per SFF-8436) |
| Laser Safety | Class 1 FDA/CDRH, IEC 60825-1 |
| RoHS Compliance | Yes |
| Weight | Approximately 85 g |
| Dimensions (H x W x D) | 8.5 mm x 18.35 mm x 72.2 mm |
| Interface | 4x 25G NRZ electrical lanes |
| Supported Cable Types | OM3/OM4 multimode fiber with MPO connector |
| Hot Pluggable | Yes |
| Warranty | 3 years (limited) |
Frequently Asked Questions - QSFP-100G-SR4 Planet
What is the maximum reach of the Planet QSFP-100G-SR4?
The module supports up to 70 meters on OM3 multimode fiber and 100 meters on OM4 multimode fiber.
Is the QSFP-100G-SR4 compatible with any switch?
It is compliant with the QSFP+ MSA and IEEE 802.3bm standard, so it works with most switches supporting 100GBASE-SR4. However, always check your switch's compatibility list.
What connector does this module use?
It uses a 12-fiber MPO/MTP female connector (standard for parallel multimode optics).
Does it support digital diagnostics?
Yes, it supports DDM/DOM (Digital Diagnostic Monitoring) functions per SFF-8436, allowing real-time monitoring of temperature, voltage, laser bias, and optical power.
What is the typical power consumption?
The maximum power consumption is 3.5 W, typical values are lower.
Can I use this module with single-mode fiber?
No, this is a multimode transceiver designed for 850 nm operation. For single-mode, you would need a different module like 100GBASE-LR4.
How do I clean the MPO connector?
Use a MPO-specific cleaning tool and isopropyl alcohol. Avoid touching the fiber end face. Regular cleaning is essential for reliable performance.
What is the operating temperature range?
The module operates from 0°C to 70°C and can be stored from -40°C to 85°C.
Is the Planet QSFP-100G-SR4 hot-pluggable?
Yes, it is designed for hot insertion and removal without powering down the host system.
What warranty does it come with?
Planet offers a 3-year limited warranty against defects in materials and workmanship.
User questions about QSFP-100G-SR4 Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network component in PDF format for free! Find your manual QSFP-100G-SR4 - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. QSFP-100G-SR4 by Planet.
USER MANUAL QSFP-100G-SR4 Planet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Planet
Model : QSFP-100G-SR4
Category : Network component