JL Audio

Stealthbox SB-GM-TAHOCNSL/10W1v3 - Subwoofer JL Audio - Free user manual and instructions

Find the device manual for free Stealthbox SB-GM-TAHOCNSL/10W1v3 JL Audio in PDF.

📄 5 pages English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
Notice JL Audio Stealthbox SB-GM-TAHOCNSL/10W1v3 - page 1
1 / 5
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Stealthbox Powered Subwoofer System
Brand JL Audio
Model SB-GM-TAHOCNSL/10W1v3
Vehicle Fitment Chevrolet Tahoe / Suburban (specified years)
Subwoofer Size 10 inches
Subwoofer Model 10W1v3
Enclosure Type Custom-fit sealed enclosure
Power Handling (RMS) 300 Watts
Power Handling (Peak) 600 Watts
Impedance 4 ohms (single voice coil)
Frequency Response 29 Hz - 200 Hz
Dimensions (W x H x D) Approx. 25 x 14 x 10 inches (varies by vehicle)
Net Weight Approx. 25 lbs (11.3 kg)
Mounting Depth 5.125 inches (130 mm)
Mounting Hole Diameter 9.125 inches (232 mm)
Installation Location Rear cargo area, passenger side
Included Hardware Mounting brackets, wiring harness, instructions
Required Amplifier Power 200 - 400 Watts RMS at 4 ohms
Wiring Configuration Single 4-ohm voice coil
Enclosure Material Fiberglass composite with carpet finish
Grille Included Yes, protective metal grille
Warranty 2 years (JL Audio)
Maintenance Keep dry; clean with damp cloth; avoid solvents
Safety Secure mounting; avoid obstructing vents; use proper gauge wire

Frequently Asked Questions - Stealthbox SB-GM-TAHOCNSL/10W1v3 JL Audio

What vehicles is the JL Audio Stealthbox SB-GM-TAHOCNSL/10W1v3 compatible with?
This Stealthbox is designed specifically for Chevrolet Tahoe and Suburban models (typically 2007-2014). Always verify fitment for your exact year and trim.
Does the Stealthbox come with a subwoofer already installed?
Yes, it includes a JL Audio 10W1v3 subwoofer pre-mounted in a custom fiberglass enclosure.
What amplifier do I need for this subwoofer?
The 10W1v3 handles 300W RMS at 4 ohms. An amplifier delivering 200-400W RMS at 4 ohms is recommended.
How do I install the Stealthbox?
Installation involves removing the passenger-side rear trim panel, placing the enclosure, and securing it with provided brackets. Wiring includes connecting the subwoofer leads to an external amplifier. Full instructions are in the manual.
Does this Stealthbox replace any factory components?
It is designed to fit in the factory storage compartment location, replacing the factory subwoofer (if equipped) or storage bin.
What is the impedance of the 10W1v3 subwoofer?
The subwoofer has a single 4-ohm voice coil.
Can I use this Stealthbox with a factory radio?
Yes, but you will need an aftermarket amplifier and a line output converter (LOC) to tap into speaker-level signals.
What are the dimensions of the enclosure?
Approximate dimensions: 25 inches wide, 14 inches high, 10 inches deep. Exact dimensions vary slightly by vehicle.
How much does the Stealthbox weigh?
The complete unit weighs approximately 25 lbs (11.3 kg).
Does the Stealthbox come with a grille?
Yes, a protective metal grille is included to prevent damage to the subwoofer.

User questions about Stealthbox SB-GM-TAHOCNSL/10W1v3 JL Audio

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Subwoofer in PDF format for free! Find your manual Stealthbox SB-GM-TAHOCNSL/10W1v3 - JL Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Stealthbox SB-GM-TAHOCNSL/10W1v3 by JL Audio.

USER MANUAL Stealthbox SB-GM-TAHOCNSL/10W1v3 JL Audio

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : JL Audio

Model : Stealthbox SB-GM-TAHOCNSL/10W1v3

Category : Subwoofer