32-8585 - Multimeter Cotech - Free user manual and instructions
Find the device manual for free 32-8585 Cotech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter |
| Model | 32-8585 |
| Brand | Cotech |
| Display | LCD with backlight |
| Max Voltage (DC) | 600 V |
| Max Voltage (AC) | 600 V |
| Max Current (DC) | 10 A |
| Resistance Range | 0 Ω – 20 MΩ |
| Capacitance Measurement | Yes |
| Frequency Measurement | Yes |
| Diode Test | Yes |
| Continuity Buzzer | Yes |
| Dimensions (approx.) | 140 x 70 x 30 mm |
| Weight (approx.) | 200 g |
| Power Supply | 9V battery (6F22) |
| Safety Rating | CAT II 600V |
| Auto-Ranging | Yes |
| Data Hold | Yes |
| Backlight | Yes |
| Cleaning | Wipe with a dry cloth; do not use abrasive cleaners |
| Storage | Store in a dry, dust-free environment |
| Included Accessories | Test leads, 9V battery, user manual |
Frequently Asked Questions - 32-8585 Cotech
How do I measure AC voltage with this multimeter?
Set the rotary switch to the V~ (AC voltage) range. Insert the black probe into the COM jack and the red probe into the VΩmA jack. Connect the probes across the circuit and read the display.
What does 'OL' mean on the display?
OL stands for Overload or Open Loop. It indicates that the measured value exceeds the selected range. Try switching to a higher range or the auto-ranging mode.
How do I replace the battery?
Turn off the multimeter and remove the test leads. Open the battery compartment on the back using a screwdriver. Replace the 9V battery (6F22) with a new one, ensuring correct polarity. Close the compartment and secure the screw.
Can I measure current above 10A?
No, this multimeter is rated for a maximum of 10A (unfused) for short measurements. For currents above 10A, use a clamp meter or a higher-rated instrument. Never exceed the rated limits.
How do I test continuity?
Set the rotary switch to the continuity/diode position (usually marked with a buzzer symbol). Insert the probes as for resistance measurement. If the circuit is connected (resistance < ~30 Ω), the buzzer will sound.
What is the CAT II safety rating?
CAT II means the multimeter is designed for measurements on circuits directly connected to a low-voltage installation (e.g., household outlets). It provides protection against transient overvoltages up to 600V.
How do I use the data hold function?
After taking a measurement, press the 'HOLD' button to freeze the reading on the display. Press it again to release the hold. This is useful for recording readings in difficult positions.
The display shows 'bAt' – what does that mean?
'bAt' indicates a low battery. Replace the 9V battery as soon as possible to ensure accurate measurements and proper operation.
Can I measure capacitance with this multimeter?
Yes, set the rotary switch to the capacitance (often denoted by a capacitor symbol) range. Discharge the capacitor first, then insert the probes (observe polarity if needed) and read the value.
How do I clean the multimeter?
Turn off the device and remove the test leads. Use a soft, dry cloth to wipe the exterior. Do not use any solvents, abrasive cleaners, or immerse the meter in water.
User questions about 32-8585 Cotech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Multimeter in PDF format for free! Find your manual 32-8585 - Cotech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 32-8585 by Cotech.
USER MANUAL 32-8585 Cotech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Cotech
Model : 32-8585
Category : Multimeter