TX15F - Loudspeaker MARTIN - Free user manual and instructions
Find the device manual for free TX15F MARTIN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Active 2-way loudspeaker |
| Woofer | 15" (381mm) neodymium low frequency |
| Compression driver | 1" (25mm) exit, 1.4" diaphragm |
| Frequency response | 55 Hz – 20 kHz (±3 dB) |
| Max SPL | 131 dB peak |
| Power handling (AES) | 400 W continuous, 1600 W peak |
| Impedance | 8 Ω nominal |
| Sensitivity (1W/1m) | 98 dB |
| Dispersion (H x V) | 90° x 60° |
| Connectors | 2 x Neutrik NL4 Speakon |
| Enclosure | 15 mm birch plywood |
| Finish | Black textured polyurea |
| Grille | Powder coated perforated steel |
| Rigging points | 8 x M10 insert points |
| Dimensions (H x W x D) | 699 x 427 x 378 mm (27.5 x 16.8 x 14.9 in) |
| Weight | 29.0 kg (63.9 lb) |
| Power supply | Not applicable (passive) |
| Amplifier recommendation | Martin Audio iK42 or similar 800-1600W @ 8Ω |
| Cleaning | Wipe with a dry cloth; never use solvents |
| Safety | Use rated rigging hardware; do not suspend over people without secondary safety |
| Spare parts | Contact Martin Audio authorized service centers |
Frequently Asked Questions - TX15F MARTIN
What is the power handling of the TX15F?
The TX15F handles 400 W continuous (AES) and 1600 W peak. We recommend an amplifier capable of delivering 800–1600 W into 8 ohms.
What is the impedance of the TX15F?
The nominal impedance is 8 ohms.
Can I use the TX15F as a floor monitor?
Yes, the TX15F has a trapezoidal shape allowing it to be used as a wedge monitor when placed on its side.
What connectors does the TX15F use?
It uses 2 x Neutrik NL4 Speakon connectors in parallel (pins 1+ and 1-).
What is the frequency response?
The frequency response is 55 Hz – 20 kHz (±3 dB).
How much does the TX15F weigh?
It weighs approximately 29.0 kg (63.9 lb).
Can I suspend the TX15F?
Yes, it has 8 x M10 threaded inserts for use with Martin Audio rigging hardware. Always follow safety guidelines.
What amplifier is recommended?
Martin Audio recommends the iK42 digital amplifier, but any quality amplifier delivering 800–1600 W into 8 ohms will work.
Is the TX15F weather resistant?
The TX15F is designed for indoor use only unless protected from moisture. The cabinet has a textured polyurea coating but is not weather-rated.
How do I clean the TX15F?
Wipe the enclosure with a dry soft cloth. Do not use water, solvents, or abrasive cleaners.
User questions about TX15F MARTIN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual TX15F - MARTIN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TX15F by MARTIN.
USER MANUAL TX15F MARTIN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MARTIN
Model : TX15F
Category : Loudspeaker