Renmark F180B-2 - Heating Regency - Free user manual and instructions
Find the device manual for free Renmark F180B-2 Regency in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Gas Fireplace / Heater |
| Model | Renmark F180B-2 |
| Brand | Regency |
| Fuel Type | Natural Gas or Propane (convertible) |
| Heat Output (BTU/h) | 30,000 |
| Efficiency | Up to 80% AFUE |
| Dimensions (W x H x D) | 30" x 20" x 15" |
| Weight | 80 lbs |
| Ignition | Standing pilot with intermittent electronic ignition |
| Control | Remote control included, thermostat ready |
| Flame Adjustment | Variable flame height via remote or manual valve |
| Safety Features | Oxygen Depletion Sensor (ODS), flame failure safety, auto shut-off |
| Venting | Direct vent (sealed combustion) |
| Glass Front | Tempered ceramic glass with high temperature rating |
| Log Set | Ceramic fiber logs with realistic appearance |
| Burner System | Premium burner with adjustable ember bed |
| Maintenance | Annual inspection and cleaning of burner, pilot, and glass |
| Replaceable Parts | Logs, burner, pilot assembly, glass, remote |
| Repair Approach | Common parts available through authorized Regency dealers |
| Warranty | Limited lifetime on firebox, 5 years on components |
Frequently Asked Questions - Renmark F180B-2 Regency
How do I turn on the Renmark F180B-2?
Ensure the gas supply is on. Use the remote control or manual valve to ignite the pilot. Follow the sequence: press the remote ON button or turn the knob to PILOT, depress and light, then turn to ON.
What type of gas does the unit use?
The heater is factory set for natural gas but can be converted to propane using a conversion kit. Check the rating plate for specifics.
How do I clean the glass front?
Allow the heater to cool completely. Use a soft cloth and a glass cleaner recommended for ceramic glass. Avoid abrasive cleaners.
What safety devices does the heater have?
It includes an Oxygen Depletion Sensor (ODS) that shuts off the gas if oxygen levels drop, and a flame failure safety that stops gas flow if the flame goes out.
How often should I service the unit?
Annual maintenance by a qualified technician is recommended. This includes cleaning the burner, pilot, and verifying venting integrity.
Can I install the unit myself?
No, installation must be performed by a licensed gas fitter in accordance with local codes. Improper installation can cause fire or carbon monoxide hazards.
Why won't the pilot light stay lit?
Possible causes: a dirty pilot orifice, a faulty thermocouple, or insufficient gas flow. Clean the pilot orifice and ensure the thermocouple is positioned correctly. If persists, call a technician.
What are the clearances to combustibles?
Clearances vary based on installation. Typical: 18 inches from top, 6 inches from sides, 10 inches from bottom. Refer to the manual for exact distances.
How do I replace the batteries in the remote?
Open the battery compartment on the back of the remote and replace with two AA batteries. Use alkaline batteries for best performance.
Where can I find replacement parts?
Contact an authorized Regency dealer or visit the Regency website. Use the model number Renmark F180B-2 to order correct parts.
User questions about Renmark F180B-2 Regency
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual Renmark F180B-2 - Regency and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Renmark F180B-2 by Regency.
USER MANUAL Renmark F180B-2 Regency
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Regency
Model : Renmark F180B-2
Category : Heating