LTV-POOL - Uncategorized LA CROSSE TECHNOLOGY - Free user manual and instructions
Find the device manual for free LTV-POOL LA CROSSE TECHNOLOGY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Pool/Spa Thermometer |
| Dimensions (Floating Sensor) | Approx. 4.5 x 2.5 x 2.5 inches (11.4 x 6.4 x 6.4 cm) |
| Weight (Floating Sensor) | Approx. 4.2 oz (119 g) |
| Power Source (Sensor) | 1x AAA battery (not included) |
| Power Source (Display) | 2x AAA batteries (not included) |
| Wireless Range | Up to 80 feet (24 meters) open air |
| Temperature Measurement Range | 32°F to 140°F (0°C to 60°C) |
| Temperature Display Resolution | 0.1°F (0.1°C) |
| Display Type | LCD with large digits |
| Waterproof Rating (Sensor) | IPX7 (submersible up to 1 meter for 30 minutes) |
| Mounting Options | Floating in pool or spa; clip attachment available |
| Transmission Frequency | 433 MHz |
| Compatible with | Indoor or outdoor display receiver |
| Included Accessories | Floating sensor, display receiver, user manual |
| Warranty | Limited 1-year warranty |
| Recommended Use | Above-ground and in-ground pools, spas, hot tubs |
| Cleaning and Maintenance | Rinse sensor with fresh water after use; clean display with soft damp cloth |
| Safety Precautions | Keep small parts away from children; do not ingest batteries |
| Repairability | No user-serviceable parts; contact manufacturer for battery replacement |
Frequently Asked Questions - LTV-POOL LA CROSSE TECHNOLOGY
How do I set up the LTV-POOL thermometer?
Insert AAA batteries into the floating sensor and display receiver. Place the sensor in the pool or spa. The display will automatically show the temperature within a few minutes.
Why is the display showing no signal or dashes?
Ensure the sensor is within range (up to 80 feet open air). Replace batteries if low. Press the reset button on the display or sensor if needed.
What type of batteries does the LTV-POOL use?
The floating sensor uses one AAA battery, and the display receiver uses two AAA batteries. Batteries are not included.
Can the sensor be submerged in water?
Yes, the sensor is IPX7 rated, meaning it can be submerged up to 1 meter for 30 minutes. It is designed to float.
How accurate is the temperature reading?
The accuracy is ±1°F (±0.5°C) typically. For best results, keep the sensor away from direct sunlight and heater outlets.
How do I clean the sensor and display?
Rinse the sensor with fresh water after each use to remove chlorine or salt. Wipe the display with a soft, damp cloth. Do not use harsh chemicals.
What is the maximum distance between the sensor and display?
The wireless range is up to 80 feet (24 meters) in open air. Walls and interference may reduce range.
Can I use this thermometer in a saltwater pool?
Yes, the sensor is designed for both chlorine and saltwater pools. Rinse thoroughly after use to prolong life.
The display shows incorrect temperature. What should I do?
Check that the sensor is not near a heater or in direct sunlight. Try moving it to a different location. Replace batteries if they are old.
How do I replace the battery in the floating sensor?
Unscrew the cap on the sensor, remove the old battery, and insert a new AAA battery. Ensure the O-ring is clean and tight to maintain waterproof seal.
User questions about LTV-POOL LA CROSSE TECHNOLOGY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual LTV-POOL - LA CROSSE TECHNOLOGY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LTV-POOL by LA CROSSE TECHNOLOGY.
USER MANUAL LTV-POOL LA CROSSE TECHNOLOGY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LA CROSSE TECHNOLOGY
Model : LTV-POOL
Category : Uncategorized