HT-R590 - Récepteur audio-vidéo ONKYO - Free user manual and instructions

USER MANUAL HT-R590 ONKYO

Sur les modèles dont la fiche est polarisée:

ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND.

Supplied Accessories

Front right Front left

Speaker Configuration

Connecting Components with HDMI VCR or DVD recorder/Digital Video Recorder

Connecting Onkyo RI Components

Turning On/Off the AV Receiver

B Manual tuning mode

In manual tuning mode, FM stations will be in mono. En 24

Using Basic Functions

Listening Mode Description Speaker

Setting the Display Brightness Changing the Input Display

Sp Config (Speaker Configuration

Turn this setting on to broaden the width of the front stereo image when using the Dolby Pro Logic IIx Music listening mode.

“Auto Standby” will display on the display and OSD from 30 seconds before the Auto Standby functions.

Default setting: On (Asian models), Off (North American and Brazilian models) En 42

ECC) HoMI Setup Turn this setting on to allow RIHD -compatible components connected via HDMI to be controlled by the AV receiver (> page 57).

+ When set to “On” and close the menu, the name of connected

Turn this setting on to reduce the dynamic range of Dolby

Digital material so that you can still hear quiet parts even when listening at low volume levels—ideal for watching movies late at night when you don't want to disturb anyone.

+ The effect of the Late Night function depends on the material that you are playing and the intention of the original sound designer, and with some material there will be little or no effect when you select the different options.

Turn this setting on to enhance the sound quality of compressed music files. Use it with music files that use “lossy” compression, such as MP3.

Press the appropriate

REMOTE MODE first. à

v: Available buttons

Resetting REMOTE MODE Buttons

“The RIHD function is not supported. The RIHD supported by the AV receiver is the CEC system control function of the HDMI standard.

“2 These buttons function as colored buttons or A, B, C, D buttons.

E When the power is restored after a power terruption, “CHECK SP WIRE” appears on the display

If the video source is connected to an HDMI input, 14,35 you must assign that input 10 an input selector, and

Connection Tips and Video Signal Path

BHovw to connect and setup