DX3-DPSB56 - Controller Irritrol - Free user manual and instructions
Find the device manual for free DX3-DPSB56 Irritrol in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Sprinkler Controller |
| Brand | Irritrol |
| Model | DX3-DPSB56 |
| Number of Stations | 3 |
| Dimensions (H x W x D) | 8.5 x 6.5 x 2.5 inches |
| Weight | 1.2 lbs |
| Power Supply | 24 VAC, 50/60 Hz (transformer included) |
| Backup Battery | 9V alkaline (not included) |
| Programming | 3 independent programs with up to 4 start times each |
| Station Run Time | 1 minute to 6 hours per station |
| Rain Delay | Up to 7 days |
| Manual Operation | Yes, single station or all stations |
| Indoor/Outdoor Use | Indoor mount only |
| Enclosure Rating | NEMA 1 (indoor) |
| Cleaning | Wipe with soft damp cloth; do not use solvents |
| Safety | Use only with specified transformer; avoid water exposure |
| Spare Parts | Available through authorized Irritrol dealers |
| Repair | Refer to manual or contact Irritrol support |
| Warranty | 2 years limited |
Frequently Asked Questions - DX3-DPSB56 Irritrol
How do I set the current time on my DX3-DPSB56 controller?
Press the SET TIME button, then use the + and - buttons to adjust hours and minutes. Press ENTER to save.
How many stations can I connect to this controller?
The DX3-DPSB56 supports up to 3 stations. Each station can be programmed independently.
What type of transformer is required?
Use a 24 VAC transformer rated for at least 1.0 A. The transformer is typically included with the controller.
How do I program a watering schedule?
Press PROGRAM to select a program (A, B, or C). Then set start times and run times for each station using the START TIME and RUN TIME buttons.
What does the rain delay feature do?
Rain delay temporarily suspends watering for 1 to 7 days. Activate by pressing RAIN DELAY and setting the number of days.
How do I manually run a single station?
Turn the dial to MANUAL, select the station using the + and - buttons, then press ENTER. The station will run for its programmed time.
Why is my controller not turning on?
Check that the transformer is plugged in and the outlet is live. Also verify the 9V backup battery is installed correctly (if using battery power).
Can I mount this controller outdoors?
No, the DX3-DPSB56 is rated for indoor use only. Install it in a garage or sheltered area to protect from moisture.
How do I reset the controller to factory defaults?
Press and hold the RESET button (located behind the door) for 3 seconds. All programs will be cleared.
Where can I find spare parts or service?
Contact an authorized Irritrol dealer or visit irritrol.com for support and replacement parts.
User questions about DX3-DPSB56 Irritrol
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Controller in PDF format for free! Find your manual DX3-DPSB56 - Irritrol and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DX3-DPSB56 by Irritrol.
USER MANUAL DX3-DPSB56 Irritrol
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Irritrol
Model : DX3-DPSB56
Category : Controller