RCI F1119 - Uncategorized Dormakaba - Free user manual and instructions
Find the device manual for free RCI F1119 Dormakaba in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electronic Access Control Lock |
| Brand | Dormakaba |
| Model | RCI F1119 |
| Dimensions (approx.) | 4.0 x 2.5 x 1.5 inches (100 x 63 x 38 mm) |
| Weight | 1.2 lbs (0.55 kg) |
| Power Supply | 4 x AA alkaline batteries (6V DC) |
| Battery Life | Approximately 1 year under normal usage |
| Low Battery Warning | Audible beeps and LED indicator |
| Operating Temperature | -4°F to 158°F (-20°C to 70°C) |
| Water Resistance | IP44 (splash proof) |
| Key Override | Mechanical key cylinder included |
| User Capacity | Up to 100 user codes |
| Programming | Keypad or software via USB (optional) |
| Locking Mechanism | Motorized deadbolt |
| Mounting | Standard US door prep (2-1/8" bore, 2-3/4" backset) |
| Door Thickness | 1-3/8" to 2" (35 to 51 mm) |
| Audible Feedback | Adjustable volume tones |
| LED Indicators | Green (success), Red (failure), Amber (low battery) |
| Cleaning Instructions | Wipe with a soft dry cloth; do not use abrasive cleaners |
| Spare Parts Availability | Batteries, screws, and keypads available from Dormakaba |
| Warranty | Limited 2-year warranty |
Frequently Asked Questions - RCI F1119 Dormakaba
How do I change the batteries in the Dormakaba RCI F1119?
Remove the interior escutcheon by unscrewing the bottom screw. Slide the cover off and replace the 4 AA batteries with fresh ones, observing polarity. Reattach the cover and test the lock.
What do I do if my lock does not respond to the keypad?
First, check if the batteries are low (red LED). Replace them if needed. If still not responding, try using the mechanical key override. If the lock still fails, contact Dormakaba technical support.
Can I install the RCI F1119 on a metal door?
Yes, the RCI F1119 is designed for both wood and metal doors. Ensure the door preparation matches the standard 2-1/8" bore hole and 2-3/4" backset.
How do I add a new user code?
Enter the master code (default 123456) followed by #. Then press 1 and enter a new 4-6 digit user code, then press #. Repeat for additional codes. Exit by pressing *.
What is the default master code for the RCI F1119?
The default master code is 123456. It is strongly recommended to change it upon installation for security.
How do I reset the lock to factory settings?
Press the reset button on the interior board (requires removing the cover) for 5 seconds. All codes will be cleared and the master code will revert to 123456.
Is the Dormakaba RCI F1119 weather-resistant for outdoor use?
It has an IP44 rating, meaning it is splash-proof. It can be used on covered outdoor doors, but exposure to heavy rain or direct water spray should be avoided.
Can I use the lock with a smart home system?
The RCI F1119 is a standalone lock and does not have built-in WiFi or Z-Wave. However, an optional gateway module (sold separately) can enable remote access via the Dormakaba app.
How do I adjust the volume of the keypad beeps?
Enter the master code + #, then press 5, then press 1 (high), 2 (medium), 3 (low), or 4 (mute). Exit by pressing *.
What should I do if the key override does not work?
Ensure you are using the correct key and inserting it fully. If the key turns but the lock doesn't move, the mechanism may be jammed. Lubricate the key cylinder with graphite powder and try again. If it still fails, contact Dormakaba support.
User questions about RCI F1119 Dormakaba
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual RCI F1119 - Dormakaba and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RCI F1119 by Dormakaba.