A58F2P-M2 - Motherboard ECS - Free user manual and instructions
Find the device manual for free A58F2P-M2 ECS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motherboard |
| Brand | ECS |
| Model | A58F2P-M2 |
| Form Factor | Micro-ATX |
| Dimensions | 244 mm x 244 mm |
| Weight | Approximately 0.8 kg |
| CPU Socket | FM2+ |
| Chipset | AMD A58 |
| Memory Support | 2 x DIMM slots, DDR3 up to 2133 MHz, max 32 GB |
| Expansion Slots | 1 x PCIe x16, 1 x PCIe x1, 1 x PCI |
| Storage Connectors | 4 x SATA 6 Gb/s |
| USB Ports | 4 x USB 3.0 rear, 2 x USB 2.0 rear, internal headers for additional |
| Audio | Realtek ALC662, 6-channel HD audio |
| LAN | Realtek RTL8111E, 10/100/1000 Mbps |
| Power Connectors | 24-pin ATX, 4-pin CPU |
| Cooling | Passive heatsink on chipset |
| Operating Temperature | 0°C to 45°C |
| BIOS | AMI UEFI |
| Maintenance | Clean with dry cloth; avoid liquids |
| Safety | Use only with compatible PSU; handle with anti-static precautions |
| Spare Parts & Repairability | Typical motherboard; replacement parts available through ECS support |
Frequently Asked Questions - A58F2P-M2 ECS
Is the ECS A58F2P-M2 motherboard compatible with AMD Ryzen processors?
No, this motherboard has an FM2+ socket and supports only AMD A-series, Athlon, and Sempron processors. It is not compatible with Ryzen CPUs.
What type of RAM does the A58F2P-M2 support?
It supports DDR3 memory up to 2133 MHz (overclocked), with a maximum capacity of 32 GB across two DIMM slots.
How do I enable XMP or AMP for memory overclocking?
Enter the BIOS (usually by pressing Del during boot), navigate to the overclocking menu, and enable AMP (AMD Memory Profile) or manually set memory frequency and timings.
Does the motherboard support dual graphics (Hybrid CrossFire)?
Yes, if you have an AMD A-series APU with integrated graphics and a compatible discrete Radeon GPU, you can enable Dual Graphics via the BIOS.
Why does my system not boot and the CPU fan spins for a few seconds then stops?
This could indicate a RAM compatibility issue or improper CPU installation. Try reseating the RAM modules in the correct slots (usually slot 2 first) and ensure the CPU power connector is firmly attached.
Can I use M.2 SSDs with the A58F2P-M2?
No, this motherboard does not have an M.2 slot. You can only use SATA SSDs with the four SATA 6 Gb/s ports.
How do I update the BIOS on the A58F2P-M2?
Download the latest BIOS from the ECS website, copy it to a FAT32 USB drive, enter BIOS (press Del), and use the EZ Flash utility to update. Ensure stable power during the process.
What operating systems are supported?
The motherboard supports Windows 7 (32/64-bit), Windows 8/8.1 (64-bit), and Windows 10 (64-bit). Linux distributions with kernel 3.x or later may also work.
How do I clear the CMOS if I forget the BIOS password?
Turn off the system, unplug power, remove the CMOS battery (CR2032) for about 30 seconds, then reinsert it. Alternatively, use the CLR_CMOS jumper on the motherboard.
Does the board support front panel USB 3.0?
Yes, it has an internal USB 3.0 header (19-pin). However, this header may not be present on all cases; check your case specifications.
User questions about A58F2P-M2 ECS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motherboard in PDF format for free! Find your manual A58F2P-M2 - ECS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. A58F2P-M2 by ECS.
USER MANUAL A58F2P-M2 ECS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ECS
Model : A58F2P-M2
Category : Motherboard