MDWB1SS - Dishwasher MIDEA - Free user manual and instructions
Find the device manual for free MDWB1SS MIDEA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dishwasher |
| Brand | Midea |
| Model | MDWB1SS |
| Installation Type | Freestanding |
| Dimensions (H x W x D) | 845 x 600 x 600 mm |
| Weight | 45 kg |
| Capacity | 12 Place Settings |
| Energy Efficiency Class | A+ |
| Noise Level | 49 dB(A) |
| Number of Programs | 6 |
| Water Consumption per Cycle | 9.5 L |
| Annual Energy Consumption | 262 kWh |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption | 1800 W |
| Control Type | Electronic with LED Display |
| Delay Start | Up to 24 Hours |
| Tub Material | Stainless Steel |
| Self-Cleaning Filter | Yes |
| Adjustable Upper Basket | Yes |
| Cutlery Basket | Yes |
| Child Lock | Yes |
| Anti-Flood System | Yes |
| Rinse Aid Indicator | Yes |
| Salt Indicator | Yes |
Frequently Asked Questions - MDWB1SS MIDEA
How to install the Midea MDWB1SS dishwasher?
Installation requires connecting to water supply (hot or cold), drainage, and power. Ensure the dishwasher is level and secure. Refer to the manual for detailed steps. For optimal performance, use a dedicated outlet.
What detergent should I use in this dishwasher?
Use a dishwasher-specific detergent in powder, gel, or tablet form. Pre-measured tablets are convenient. Always add rinse aid for better drying results.
Why is my dishwasher not cleaning dishes properly?
Check if the spray arms are blocked, filter is dirty, or you are overloading. Ensure proper detergent dosage and water temperature. Also, verify that no large food particles are stuck.
How to clean the filter of the Midea dishwasher?
Remove the lower rack and unscrew the cylindrical filter. Clean under running water with a brush. Replace it securely. Clean the filter every few weeks for best performance.
What does error code E1 mean?
Error E1 indicates a water supply issue. Check if the water inlet hose is kinked or the tap is closed. Also ensure the water pressure is adequate. If the problem persists, contact service.
How to start a wash cycle?
Load the dishes, add detergent, close the door, and press the Power button. Select a program using the program selection buttons, then press Start. The display shows remaining time.
How to adjust the rinse aid setting?
Open the rinse aid dispenser and adjust the dial to a higher setting (e.g., 4-6) if dishes are spotted. Lower settings reduce consumption. Refer to manual for details.
How to reset the dishwasher?
To reset, press and hold the Start/Reset button for 3 seconds until the display turns off. Then, wait a few seconds and turn it on again. This cancels the current cycle.
Why is my dishwasher noisy?
Noise can come from spray arms hitting dishes, loose items, or worn bearings. Ensure dishes are properly arranged and not blocking arms. If noise persists, check for foreign objects.
How to save energy when using the dishwasher?
Use Eco programs for normal loads, run full loads, and avoid pre-rinsing. Activate half-load option if available. Also, use the delay start to run during off-peak hours.
User questions about MDWB1SS MIDEA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual MDWB1SS - MIDEA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MDWB1SS by MIDEA.
USER MANUAL MDWB1SS MIDEA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MIDEA
Model : MDWB1SS
Category : Dishwasher