DT282PIT - Tumble dryer SMEG - Free user manual and instructions
Find the device manual for free DT282PIT SMEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Brand | Smeg |
| Model | DT282PIT |
| Installation Type | Freestanding |
| Loading Type | Front-Load |
| Drying System | Condenser |
| Capacity (max dry load) | 8 kg |
| Drum Volume | 120 L |
| Energy Efficiency Class | A++ |
| Annual Energy Consumption | 240 kWh |
| Noise Level | 65 dB(A) |
| Number of Drying Programs | 15 |
| Drying Programs | Cotton, Synthetics, Delicates, Wool, Mix, Time, Quick 30 min, etc. |
| Reverse Tumble Action | Yes |
| Delay Start | Up to 24 hours |
| Child Lock | Yes |
| Filter Type | Lint filter (removable, washable) |
| Water Tank Location | Top right drawer |
| Dimensions (HxWxD) | 85 x 60 x 60 cm |
| Weight | 45 kg |
| Power Supply | 220-240 V, 50 Hz |
| Rated Power | 2000 W |
| Cord Length | 1.5 m |
| Spare Parts Availability | 7 years from end of production |
| Repairability Index | 7.5 / 10 |
Frequently Asked Questions - DT282PIT SMEG
How do I clean the lint filter on my SMEG DT282PIT?
To clean the lint filter, open the door, pull the filter located on the door opening, remove lint carefully, rinse with water if needed, and dry before reinserting. Clean after every cycle for optimal drying performance.
Why is my dryer not drying clothes properly?
Possible reasons: lint filter clogged, water tank full, condenser heat exchanger blocked, or overloading. Check filter, empty water tank, clean the condenser unit as per manual, and reduce load size.
How do I empty the water tank on the DT282PIT?
The water tank is located at the top right corner. Pull out the drawer, empty the water into a sink, and push it back securely. For continuous draining, you can connect a hose (sold separately) to the rear outlet.
What do the error codes on my SMEG dryer mean?
Common codes: E01 (water tank full), E02 (clogged filter), E03 (drum blockage), E04 (heating issue). Refer to the manual for detailed troubleshooting.
Can I dry wool items in the DT282PIT?
Yes, the dryer has a dedicated Wool program with gentle tumble action. Always check the garment's care label and use a drying net for delicate items.
How do I install the SMEG DT282PIT dryer?
Place the dryer on a level, sturdy surface. Leave at least 10 cm clearance on sides and back for ventilation. If stacking on a washing machine, use a stacking kit (optional). Connect to a grounded outlet.
How often should I clean the condenser?
Clean the condenser unit every 3-6 months or when the 'Clean Condenser' indicator lights up. Remove the condenser from the bottom front panel, rinse with water, and dry before reinstalling.
Is the SMEG DT282PIT suitable for built-in installation?
No, this model is designed for freestanding use. It requires adequate airflow for the condenser system.
What is the energy consumption of the DT282PIT?
It has an energy efficiency class A++, with an annual consumption of approximately 240 kWh based on standard usage.
How do I use the delay start feature?
Select your drying program, then press the Delay Start button repeatedly to set hours (up to 24). Press Start to confirm. The dryer will begin at the set time.
User questions about DT282PIT SMEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual DT282PIT - SMEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DT282PIT by SMEG.
USER MANUAL DT282PIT SMEG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SMEG
Model : DT282PIT
Category : Tumble dryer