PN-UH501 - Screen SHARP - Free user manual and instructions
Find the device manual for free PN-UH501 SHARP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Professional LCD Display (LED-backlit) |
| Screen Size | 50 inches (49.5 inches diagonal) |
| Resolution | 3840 x 2160 (4K UHD) |
| Brightness | 500 cd/m² |
| Contrast Ratio | 4000:1 |
| Viewing Angle | 178° horizontal / 178° vertical |
| Response Time | 8 ms (overdrive) |
| Video Inputs | HDMI x2, DisplayPort x1, DVI-D x1, VGA x1 |
| Control Ports | RS-232C (D-sub 9 pin), LAN (RJ45) |
| Other Ports | USB 2.0 x2 (for media playback), Audio In/Out |
| Built-in Speakers | 10W + 10W stereo |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption (Typical) | 190 W (max 220 W) |
| Standby Power Consumption | < 0.5 W |
| Dimensions (W x H x D) - without stand | 1129.8 x 660.8 x 64.9 mm |
| Weight - without stand | 21.0 kg |
| VESA Mount Pattern | 400 x 400 mm (M8 screws) |
| Orientation | Landscape / Portrait (rotate via menu) |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 20% to 80% (non-condensing) |
| Safety Certifications | UL, CSA, FCC Class A, CE |
| Cleaning Instructions | Wipe with soft dry cloth; use mild detergent if needed; avoid abrasive cleaners |
| Repairability / Spare Parts | Contact SHARP service center for replacement parts; internal components not user-serviceable |
Frequently Asked Questions - PN-UH501 SHARP
How do I connect external devices to the PN-UH501?
Use the HDMI, DisplayPort, DVI-D, or VGA inputs on the rear panel. For control, use RS-232C or LAN. Refer to the input source menu to select the correct signal.
Can the display be mounted on a wall?
Yes, the PN-UH501 supports VESA 400x400 mm mounting. Use M8 screws and ensure the wall mount can support at least 21 kg.
How do I clean the screen safely?
Turn off the display and unplug it. Use a soft, lint-free cloth slightly dampened with water or a mild screen cleaner. Do not spray liquid directly on the screen.
What is the default resolution and how do I change it?
The native resolution is 3840x2160. To change, go to the Settings menu > Picture > Resolution. For best quality, use a 4K source.
Why is there no sound from the built-in speakers?
Check that the audio source is connected to the Audio In port or via HDMI. Ensure volume is not muted and is set to a reasonable level in the Audio menu.
How do I update the firmware on the display?
Download the latest firmware from SHARP's support website. Copy the file to a USB flash drive, insert it, and navigate to Settings > System > Firmware Update.
Can the display be used in portrait orientation?
Yes, you can physically rotate the display 90 degrees clockwise. Then go to Settings > Display > Orientation to set it to Portrait mode.
What is the power consumption in standby mode?
The standby power consumption is less than 0.5 watts, compliant with Energy Star requirements.
How do I reset the display to factory settings?
Press the Menu button on the remote or control panel, go to Settings > System > Factory Reset. Confirm when prompted.
What should I do if the display does not power on?
Check the power cord connection and ensure the socket is live. If still off, test with another cord. If the issue persists, contact SHARP service.
User questions about PN-UH501 SHARP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Screen in PDF format for free! Find your manual PN-UH501 - SHARP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PN-UH501 by SHARP.
USER MANUAL PN-UH501 SHARP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SHARP
Model : PN-UH501
Category : Screen