PAMP2000BT - Receiver Pyle - Free user manual and instructions
Find the device manual for free PAMP2000BT Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bluetooth Receiver / Amplifier |
| Model | PAMP2000BT |
| Brand | Pyle |
| Dimensions (Approx.) | 8.5 x 6.0 x 2.5 inches |
| Weight | 2.2 lbs (1 kg) |
| Power Supply | AC 110-240V, 50/60Hz |
| Bluetooth Version | 5.0 |
| Bluetooth Range | Up to 33 feet (10 meters) |
| Audio Inputs | RCA, 3.5mm AUX, Bluetooth |
| Audio Outputs | Speaker terminals, RCA pre-out |
| Power Output | 2000W Peak Power (2x 250W RMS @ 4 Ohm) |
| Built-in FM Tuner | Yes |
| USB/SD Reader | Yes (for MP3 playback) |
| Remote Control | Included |
| Display | LED |
| Cooling Fan | Built-in |
| Material | Metal chassis, aluminum panel |
| Cleaning Instructions | Wipe with dry cloth; avoid liquids |
| Safety Features | Overload, short circuit, thermal protection |
| Spare Parts / Repair | Contact Pyle support for authorized service |
Frequently Asked Questions - PAMP2000BT Pyle
How do I pair my phone via Bluetooth?
Ensure the receiver is in Bluetooth mode (press 'Mode' button). On your phone, enable Bluetooth, search for devices, and select 'PAMP2000BT'. If prompted, enter PIN '0000'. The LED will blink rapidly and then stay solid when connected.
What is the maximum power output?
The PAMP2000BT is rated at 2000W peak power. The RMS output is approximately 2x 250W into 4 Ohm speakers for continuous operation.
Can I use it with passive speakers?
Yes, this receiver has built-in amplification. Simply connect your passive speakers to the speaker terminals (4-16 Ohm impedance recommended). Ensure proper polarity (+/-).
How do I reset the device?
If the receiver becomes unresponsive, disconnect the power cord for 30 seconds, then reconnect. For a factory reset, press and hold the 'FM' and 'AUX' buttons simultaneously for 5 seconds.
Does it support aptX or other high-quality codecs?
The PAMP2000BT supports standard SBC and AAC codecs. It does not support aptX or LDAC.
What is the included in the box?
The package includes: PAMP2000BT receiver, remote control, antenna for FM, RCA cable, and user manual.
Can I connect a subwoofer?
Yes, use the RCA pre-out (SUB OUT) to connect a powered subwoofer. Note: this output is not amplified; a powered subwoofer is required.
The remote control does not work. What should I do?
First, check the batteries. Replace with new CR2032 if needed. Ensure the IR sensor on the receiver is not blocked. Point the remote directly at the sensor from a distance under 20 feet.
What are the dimensions of this receiver?
Approximate dimensions are 8.5 x 6.0 x 2.5 inches (21.6 x 15.2 x 6.4 cm). Weight is about 2.2 lbs (1 kg).
Is there a warranty?
Pyle offers a 1-year limited warranty against manufacturing defects. For warranty service, contact Pyle support with proof of purchase.
User questions about PAMP2000BT Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual PAMP2000BT - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PAMP2000BT by Pyle.
USER MANUAL PAMP2000BT Pyle
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pyle
Model : PAMP2000BT
Category : Receiver