ultimateSteam - Humidifier Carel - Free user manual and instructions
Find the device manual for free ultimateSteam Carel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Steam Humidifier |
| Brand | Carel |
| Model | ultimateSteam |
| Dimensions (W x H x D) | 450 x 600 x 350 mm |
| Weight | 25 kg |
| Power Supply | 230 V / 50-60 Hz, 3-phase |
| Rated Power | 6 kW |
| Steam Output | 8 kg/h |
| Control Type | Microprocessor with display |
| Humidity Control | On/Off or modulating (0-10 V or 4-20 mA) |
| Water Supply | Mains water with optional demineralization |
| Drain Connection | Gravity drain, DN20 |
| Steam Distribution | Direct or via fan-assisted diffuser |
| IP Rating | IP20 |
| Operating Temperature Range | 1°C to 40°C |
| Maintenance Requirements | Clean cylinder and drain every 6 months; check water quality |
| Safety Features | Overheat protection, low water cut-off, safety thermostat |
| Spare Parts Availability | Replacement cylinders, control boards, sensors |
| Reparability | Modular design; replaceable heating element and electronics |
| Certifications | CE, ETL, RoHS |
Frequently Asked Questions - ultimateSteam Carel
What is the recommended water quality for the ultimateSteam?
The ultimateSteam works best with demineralized or softened water to reduce scale buildup. Hard water may require more frequent cleaning of the cylinder.
How do I install the humidifier correctly?
Installation must be performed by a qualified technician. Ensure proper electrical connections, water supply, and drain. The unit should be mounted on a flat surface with adequate clearance for maintenance.
How often should I clean the steam cylinder?
Clean the cylinder every 6 months or when scale buildup affects performance. Use a descaling solution recommended by Carel and follow the manual instructions.
What does the error code on the display mean?
Error codes indicate issues like low water, overheating, or sensor faults. Refer to the troubleshooting section in the manual for specific codes and corrective actions.
Can the ultimateSteam be used with hard water?
Yes, but hard water will increase scale formation and require more frequent maintenance. Carel recommends a water treatment system for optimal performance.
How do I adjust the humidity setpoint?
Use the control panel to set the desired humidity level. The unit can operate in on/off or modulating mode depending on the connected controller.
What is the maximum steam output distance?
With a fan-assisted diffuser, steam can be distributed up to 5 meters. Direct steam hose runs should not exceed 3 meters to avoid condensation.
Is the ultimateSteam suitable for residential use?
It is designed for commercial and industrial applications. For residential use, consider smaller Carel models designed for home humidification.
How do I replace a faulty heating element?
Disconnect power, drain the cylinder, remove the old element, and install a new one. Ensure correct tightening and check for leaks before reconnecting power.
Does the unit require a dedicated electrical circuit?
Yes, a dedicated circuit with appropriate rating (e.g., 20A for 6 kW model) is recommended. Consult the electrical specifications in the manual.
User questions about ultimateSteam Carel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Humidifier in PDF format for free! Find your manual ultimateSteam - Carel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ultimateSteam by Carel.