IPC3238ER3-DVZ - Security Camera UniView - Free user manual and instructions
Find the device manual for free IPC3238ER3-DVZ UniView in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Model | IPC3238ER3-DVZ |
| Brand | UniView |
| Resolution | 2 Megapixels (1920x1080) |
| Lens | 3.6mm Fixed Lens |
| Night Vision | IR LEDs up to 30m |
| Power Supply | PoE (802.3af) or DC 12V |
| Power Consumption | < 12W |
| Dimensions (mm) | 200 x 70 x 70 |
| Weight | 0.5 kg |
| Ingress Protection | IP67 |
| Operating Temperature | -30°C to 60°C |
| Video Compression | H.265+/H.264+ |
| Supported Protocols | ONVIF, TCP/IP, HTTP, RTSP |
| Storage | MicroSD up to 128GB |
| Motion Detection | Yes |
| Audio | Two-way Audio (built-in mic & speaker) |
| Maintenance | Clean lens with soft dry cloth; avoid water or solvents |
| Safety | Professional installation required; use proper grounding |
| Spare Parts | No user-serviceable parts; contact support for repairs |
Frequently Asked Questions - IPC3238ER3-DVZ UniView
How do I reset the camera to factory defaults?
Press and hold the reset button (located near the Ethernet port) for 10 seconds until the LED blinks rapidly. The camera will reboot with default settings.
Can I use a standard PoE switch?
Yes, the camera supports 802.3af PoE. Ensure your switch provides adequate power (< 12W) and is connected via a standard Ethernet cable.
What is the maximum microSD card capacity supported?
The camera supports microSD cards up to 128GB. Use a Class 10 or higher card for reliable recording.
How do I enable motion detection alerts?
Access the camera's web interface via browser, go to Events > Motion Detection, enable it, and configure sensitivity and areas. You can set up email or FTP alerts.
Is the camera weatherproof?
Yes, the IPC3238ER3-DVZ has an IP67 rating, meaning it is dust-tight and protected against temporary submersion in water (up to 1m for 30 minutes). Suitable for outdoor use.
Can I view the camera feed remotely?
Yes, use the UniView NVR or the free UniView app (iOS/Android). Port forwarding or P2P can be configured for remote access. Ensure UPnP is enabled on your router.
What is the default IP address?
The default IP is 192.168.1.10. Connect via Ethernet, set your PC to a similar subnet (e.g., 192.168.1.100), and access via browser. Username: admin, password: admin.
How do I clean the camera lens?
Use a soft, lint-free cloth slightly dampened with water (or lens cleaner). Gently wipe the lens. Avoid touching the lens with fingers. Do not use abrasive cleaners.
Does the camera support ONVIF?
Yes, it supports ONVIF Profile S and G, allowing compatibility with third-party NVRs and software that support the ONVIF standard.
What should I do if the camera is not powering on?
Check the Ethernet cable connection and ensure PoE switch power is active. If using DC 12V, verify the power adapter. Try a different cable or port. If still not working, contact support.
User questions about IPC3238ER3-DVZ UniView
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual IPC3238ER3-DVZ - UniView and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IPC3238ER3-DVZ by UniView.
USER MANUAL IPC3238ER3-DVZ UniView
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : UniView
Model : IPC3238ER3-DVZ
Category : Security Camera