Metra

108-TO2B - Car radio Metra - Free user manual and instructions

Find the device manual for free 108-TO2B Metra in PDF.

📄 5 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Metra 108-TO2B - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Car Radio
Brand Metra
Model 108-TO2B
Dimensions (W x H x D) 180 mm x 50 mm x 160 mm
Weight 0.5 kg
Power Supply 12V DC (negative ground)
Power Output 4 x 20 Watts RMS
Radio Tuner AM/FM with 30 presets
Playback Media CD, MP3, WMA
Audio Inputs Front auxiliary (3.5 mm)
Audio Outputs 4 speaker channels, RCA pre-outs
Bluetooth Yes, hands-free calling and audio streaming
USB Port Yes, front USB for playback and charging
Display LCD with white backlight
Remote Control Included
Maintenance Wipe with a soft, dry cloth. Avoid solvents.
Safety Built-in fuse (10A). Disconnect battery before installation.
Spare Parts & Repairability Contact Metra customer service for replacement parts and service.
General Information Designed for standard single-DIN dash openings.

Frequently Asked Questions - 108-TO2B Metra

How do I install the Metra 108-TO2B car radio?
Disconnect the car battery negative terminal. Remove the old radio and wiring harness. Connect the included wiring harness to your vehicle's harness, matching colors. Slide the radio into the dash and secure with screws. Reconnect battery and test.
How do I set the clock on the radio?
Press and hold the CLK button until the time flashes. Use the TUNE knob to set the hour, then press CLK again to set minutes. Turn the knob to adjust, then press CLK to confirm.
Can I connect my phone via Bluetooth?
Yes. Enable Bluetooth on your phone and search for devices. Select 'Metra 108-TO2B' from the list. If prompted, enter PIN 0000. Once paired, you can stream music and make hands-free calls.
What should I do if there is no sound from the speakers?
Check that the volume is not muted. Verify speaker wire connections. Ensure the radio is not in AUX mode without an input. Test with a known working source (e.g., FM radio). If still no sound, check fuses.
How do I reset the radio to factory settings?
Press and hold the RESET button on the front panel for 3 seconds using a paperclip. This will clear all settings and presets.
Does this radio support USB playback?
Yes. Insert a USB drive containing MP3 or WMA files into the front USB port. The radio will automatically switch to USB mode and start playing.
How do I store radio presets?
Tune to the desired radio station. Press and hold one of the preset buttons (1-6) until the display flashes and beeps. The station is now stored.
What is the power output of this car radio?
The radio provides 20 Watts RMS per channel into 4 channels, for a total of 80 Watts.
Can I use this radio in a vehicle with positive ground?
No. This radio is designed for 12V negative ground systems only. Using it in a positive ground vehicle may damage the radio.
Where can I find the user manual?
The user manual is available for free download on notice-facile.com. Search for 'Metra 108-TO2B' to access the PDF.

User questions about 108-TO2B Metra

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Car radio in PDF format for free! Find your manual 108-TO2B - Metra and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 108-TO2B by Metra.

USER MANUAL 108-TO2B Metra

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Metra

Model : 108-TO2B

Category : Car radio