P1010 - Smoke detector FIRST ALERT - Free user manual and instructions
Find the device manual for free P1010 FIRST ALERT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Smoke Detector |
| Brand | First Alert |
| Model | P1010 |
| Dimensions (Diameter x Height) | 4.8 x 1.8 inches (122 x 46 mm) |
| Weight | 5.6 oz (158 g) |
| Power Source | 9V alkaline battery (included) |
| Sensor Type | Photoelectric |
| Detection Principle | Photoelectric smoke sensing |
| Alarm Sound Level | 85 dB at 10 ft (3 m) |
| Test Button | Yes, for functional testing |
| Low Battery Warning | Chirping sound every 30-60 seconds |
| End-of-Life Warning | Chirping sound after 10 years |
| Mounting | Ceiling or wall mount (hardware included) |
| Operating Temperature | 40°F to 100°F (4°C to 38°C) |
| Humidity Range | Up to 95% relative humidity (non-condensing) |
| Compliance | UL 217 listed |
| Battery Life | Approximately 1 year |
| Maintenance | Vacuum clean monthly; replace battery annually |
| Spare Parts Available | 9V battery (standard) |
| Repairability | Non-repairable; replace unit at end of life |
| Warranty | 5 years limited warranty |
| Installation Location | On every level of home, in bedrooms and hallways |
| Country of Origin | China |
Frequently Asked Questions - P1010 FIRST ALERT
How do I install the First Alert P1010 smoke detector?
Choose a location on the ceiling or wall (at least 4 inches from wall for ceiling mount). Use the mounting bracket as a template to mark holes, then drill and insert anchors. Screw the bracket in place, attach the detector by twisting it onto the bracket. Insert the 9V battery, then press the test button to ensure proper operation.
What type of battery does the P1010 use and how often should I change it?
The P1010 uses a standard 9V alkaline battery. Replace the battery at least once a year or immediately when the low-battery chirp begins (every 30-60 seconds). For optimal performance, change the battery when daylight saving time changes.
How do I silence a false alarm?
Press and hold the test/silence button on the detector. This will temporarily silence the alarm for several minutes. If the alarm persists, ensure there is no smoke or steam from cooking, showers, etc. Relocate the detector if necessary.
What does a chirping sound mean?
A chirp every 30-60 seconds indicates a low battery. Replace the 9V battery immediately. If the chirp continues after battery replacement, the detector may need cleaning or may be at its end of life (10 years). Consult the manual.
How often should I clean the smoke detector?
Clean the P1010 at least once a month. Use a vacuum cleaner with a soft brush attachment to gently remove dust and debris from the vents. Do not use water or cleaning solvents.
How long does the First Alert P1010 last?
The detector has a lifespan of approximately 10 years from the date of manufacture. After 10 years, it will emit a chirp to signal end-of-life, and the entire unit must be replaced.
Where should I place the smoke detector in my home?
Install at least one detector on every level of your home, inside each bedroom, and outside sleeping areas. On ceilings, mount at least 4 inches from the nearest wall. On walls, mount 4-12 inches from the ceiling. Avoid kitchens, bathrooms, and garages.
Can I paint over the smoke detector?
No, painting over the detector can block the vents and hinder smoke entry, preventing proper detection. Keep the detector unpainted.
What should I do when the detector alarms?
If the alarm sounds, do not ignore it. Immediately evacuate everyone from the building following your escape plan. Call emergency services from outside. Do not re-enter until authorities say it is safe.
Does the P1010 detect carbon monoxide?
No, the P1010 is a smoke-only alarm. It does not detect carbon monoxide, gas, or heat. For carbon monoxide protection, consider a combination smoke and CO alarm.
User questions about P1010 FIRST ALERT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Smoke detector in PDF format for free! Find your manual P1010 - FIRST ALERT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. P1010 by FIRST ALERT.
USER MANUAL P1010 FIRST ALERT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FIRST ALERT
Model : P1010
Category : Smoke detector