SURFboard SBG6580 - Router ZEBRA - Free user manual and instructions
Find the device manual for free SURFboard SBG6580 ZEBRA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cable Modem/Router Combo |
| Dimensions (W x D x H) | 10.5 x 8.5 x 2.5 inches |
| Weight | 1.5 lbs |
| Power Supply | 12V DC, 2.5A |
| Wireless Standard | 802.11n (2.4 GHz and 5 GHz) |
| LAN Ports | 4 x Gigabit Ethernet |
| Telephone Ports | 2 x RJ-11 (VoIP) |
| DOCSIS Version | 3.0 |
| Channel Bonding | 8 downstream x 4 upstream |
| Frequency Range | 5-42 MHz (upstream), 54-1002 MHz (downstream) |
| Wireless Encryption | WEP, WPA, WPA2 |
| Firewall | Stateful Packet Inspection (SPI) |
| LED Indicators | Power, DS/US, Online, LAN, Phone, Wi-Fi |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Humidity | 10% to 90% non-condensing |
| Compliance | FCC, UL, DOCSIS 3.0 Certified |
| Spare Parts Available | Power adapter, Ethernet cables, stand |
| Maintenance | Keep in ventilated area; clean with dry cloth |
| Safety | Do not expose to water; unplug during storms |
Frequently Asked Questions - SURFboard SBG6580 ZEBRA
How do I reset the SURFboard SBG6580 to factory defaults?
Press and hold the Reset button on the back panel for at least 10 seconds using a paperclip. The router will reboot and restore default settings.
What is the default IP address and login for the SBG6580?
The default IP is 192.168.0.1. Username: admin, Password: password (case-sensitive).
How can I change the Wi-Fi password?
Log into the web interface. Go to Wireless > Security. Enter a new passphrase under Pre-Shared Key and save settings.
Why is my internet light blinking or off?
A blinking light indicates the modem is scanning for a signal. Wait 5-10 minutes. If off, check coaxial cable connections and contact your ISP if the issue persists.
Can I use the SBG6580 with any cable provider?
It is compatible with most cable ISPs that support DOCSIS 3.0. Check with your provider for supported modems.
How do I enable the guest Wi-Fi network?
Log into the admin interface. Go to Wireless > Guest Network. Enable it and set a name and password.
What should I do if the router keeps disconnecting?
Ensure firmware is updated. Place the router in a central, elevated location away from interference. Check for bandwidth-hungry devices or try changing the Wi-Fi channel.
How do I update the firmware on the SBG6580?
Log into the web interface. Go to Administration > Firmware Upgrade. Browse for the downloaded file from the Zebra support site and apply.
Can I connect a USB drive for storage?
No, the SBG6580 does not have a USB port for storage. It only has Ethernet and telephony ports.
What is the maximum wireless speed?
Up to 300 Mbps per band (2.4 GHz and 5 GHz), total up to 600 Mbps under ideal conditions.
User questions about SURFboard SBG6580 ZEBRA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual SURFboard SBG6580 - ZEBRA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SURFboard SBG6580 by ZEBRA.
USER MANUAL SURFboard SBG6580 ZEBRA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ZEBRA
Model : SURFboard SBG6580
Category : Router