JiPS-250i - Loudspeaker JENSEN - Free user manual and instructions
Find the device manual for free JiPS-250i JENSEN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bookshelf Loudspeaker |
| Brand | Jensen |
| Model | JiPS-250i |
| Dimensions (W x H x D) | 200 x 300 x 250 mm |
| Weight | 5.5 kg per speaker |
| Power Handling (RMS) | 50 W |
| Impedance | 8 ohms |
| Frequency Response | 55 Hz - 20 kHz |
| Sensitivity | 88 dB (1W/1m) |
| Driver Configuration | 2-way: 1-inch tweeter, 5.25-inch woofer |
| Input Connectors | Binding posts (bi-wire capable) |
| Enclosure Type | Bass reflex (rear ported) |
| Finish | Black wood grain vinyl |
| Warranty | 1 year |
| Recommended Placement | Bookshelf or stand, away from walls |
| Cleaning Instructions | Wipe with dry cloth; avoid liquids |
| Safety Features | Non-skid feet; stable base |
| Spare Parts Availability | Contact Jensen support for drivers or crossovers |
Frequently Asked Questions - JiPS-250i JENSEN
How do I connect the Jensen JiPS-250i to my amplifier?
Use speaker wire with banana plugs or bare wire to connect the amplifier's speaker outputs to the binding posts on the JiPS-250i. Ensure correct polarity (red to red, black to black).
What is the recommended placement for optimal sound?
Place the speakers on a sturdy bookshelf or stands at ear level, at least 20 cm from walls to avoid bass boom. Angle them slightly toward the listening position for better stereo imaging.
Can I use the JiPS-250i in a home theater system?
Yes, these speakers work well as front or rear channels in a home theater. Pair with a subwoofer for enhanced bass. Ensure the amplifier can handle 8-ohm loads.
How do I clean the speakers?
Gently dust the cabinet with a soft, dry cloth. For grilles, use a vacuum with a brush attachment. Avoid liquid cleaners or solvents that may damage the finish.
What is the power handling of the JiPS-250i?
The speakers handle 50 watts RMS and 100 watts peak. Use an amplifier rated between 20 and 80 watts per channel for best performance.
Are the speakers magnetically shielded?
No, the JiPS-250i is not magnetically shielded. Keep them away from CRT televisions or other sensitive devices to avoid interference.
Can I bi-wire or bi-amp the speakers?
Yes, the binding posts allow bi-wiring or bi-amping by removing the metal jumper straps. Use separate cables for high and low frequencies.
What type of amplifier should I use?
Use a stereo or AV amplifier with 8-ohm output. Avoid very low-power amps (<10W) as they may distort at higher volumes.
How do I break in the speakers?
Play music at moderate volume for about 20-30 hours to allow the drivers to mechanically settle. This improves sound quality over time.
Where can I find spare parts or service?
Contact Jensen customer support or an authorized service center for replacement drivers, crossovers, or grilles. Keep your proof of purchase for warranty claims.
User questions about JiPS-250i JENSEN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual JiPS-250i - JENSEN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JiPS-250i by JENSEN.
USER MANUAL JiPS-250i JENSEN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JENSEN
Model : JiPS-250i
Category : Loudspeaker