Terminator 35 - Loudspeaker MTX Audio - Free user manual and instructions
Find the device manual for free Terminator 35 MTX Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Audio Subwoofer |
| Brand | MTX Audio |
| Model | Terminator 35 |
| Category | Loudspeaker |
| Woofer Size | 12 inches |
| Impedance | 4 ohms |
| Power Handling (RMS) | 250 Watts |
| Power Handling (Peak) | 500 Watts |
| Sensitivity | 87 dB (1W/1m) |
| Frequency Response | 30 Hz - 200 Hz |
| Mounting Depth | 5.5 inches |
| Mounting Hole Diameter | 11 inches |
| Recommended Enclosure Type | Sealed or Ported |
| Recommended Sealed Box Volume | 1.0 - 1.25 cubic feet |
| Recommended Ported Box Volume | 1.5 - 2.0 cubic feet |
| Voice Coil Configuration | Single 4 ohm |
| Surround Material | Foam |
| Cone Material | Polypropylene |
| General Maintenance | Keep clean with a dry cloth; avoid moisture |
| Safety Warnings | Do not exceed amplifier's rated power; protect from extreme temperatures |
| Repairability | Spare parts available from MTX Audio service centers |
Frequently Asked Questions - Terminator 35 MTX Audio
What is the recommended amplifier power for the MTX Terminator 35?
For best performance, use an amplifier delivering 250-500 Watts RMS at 4 ohms. Ensure the amplifier is stable at 4 ohms and capable of the subwoofer's RMS rating.
Can I use this subwoofer in a sealed enclosure?
Yes, the Terminator 35 works well in sealed enclosures. A sealed box of 1.0 to 1.25 cubic feet is recommended for accurate bass response.
What is the impedance of the Terminator 35?
The subwoofer has a single 4-ohm voice coil, making it ideal for amplifiers that are stable at 4 ohms.
How do I properly break in the subwoofer?
Play the subwoofer at moderate volume (30-50% of max) for 10-20 hours with a variety of music. Avoid extreme excursions during break-in.
What is the mounting depth and cutout diameter?
The mounting depth is 5.5 inches and the cutout diameter is 11 inches. Check clearance before installation.
Does the subwoofer come with a grille?
No, the Terminator 35 is typically sold without a grille. It can be used with a separate mesh grille for protection.
What type of enclosure is recommended for SPL?
For higher output, a ported enclosure tuned to 35-40 Hz with a volume of 1.5-2.0 cubic feet will maximize efficiency.
Can I wire two Terminator 35 subwoofers together?
Yes, you can wire two 4-ohm single voice coil subwoofers in parallel for a 2-ohm load, or in series for an 8-ohm load, depending on your amplifier's capabilities.
What is the warranty period for this subwoofer?
MTX Audio offers a 1-year limited warranty against defects in materials and workmanship. Keep your receipt for warranty service.
How should I clean the subwoofer?
Gently wipe the cone and surround with a soft, dry cloth. Avoid using any liquids or cleaning agents that may damage the materials.
User questions about Terminator 35 MTX Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual Terminator 35 - MTX Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Terminator 35 by MTX Audio.
USER MANUAL Terminator 35 MTX Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MTX Audio
Model : Terminator 35
Category : Loudspeaker