Boyo

VTC700RQ-2 - Dash cam Boyo - Free user manual and instructions

Find the device manual for free VTC700RQ-2 Boyo in PDF.

📄 13 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Boyo VTC700RQ-2 - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Dash Cam
Brand Boyo
Model VTC700RQ-2
Dimensions 5.5 x 2.5 x 1.5 inches
Weight 2 oz
Power Source 12V car adapter (included)
Video Resolution 1080p Full HD
Viewing Angle 120 degrees
Night Vision Yes, with IR LEDs
Loop Recording Yes
G-Sensor Yes, for emergency recording
Parking Mode Yes (motion detection)
Memory Card Support MicroSD up to 32GB (not included)
Display 2.7 inch LCD
Mount Suction cup on windshield
Maintenance Clean lens with microfiber cloth; avoid extreme temperatures
Safety Secure mount and hide cable; do not obstruct driver's view
Spare Parts Mount and charger available; memory card sold separately
General Information Includes user manual in English; firmware may be updated via SD card

Frequently Asked Questions - VTC700RQ-2 Boyo

How do I install the VTC700RQ-2 dash cam?
Clean the windshield area, attach the suction cup mount, route the power cable discreetly, and plug into the 12V outlet. Adjust the camera angle to capture the road.
What type of memory card should I use?
Use a MicroSD card up to 32GB, Class 10 or higher for reliable recording. Format the card in the camera before first use.
How do I format the SD card?
Go to the settings menu, select 'Format', and confirm. This erases all data, so backup important files first.
How do I set the date and time?
Navigate to the system settings menu, find 'Date/Time', and adjust using the directional buttons. Ensure correct time for timestamp on recordings.
How can I view recorded videos?
Remove the MicroSD card and insert into a computer, or connect the camera via USB. Videos are stored in folder 'DCIM'. Use the camera's playback mode to view on the screen.
Does the dash cam have night vision?
Yes, it features IR LEDs for low-light recording, but quality is best with adequate street lighting.
How do I enable parking mode?
Parking mode activates automatically when the car is off and motion is detected. Ensure the camera is hardwired or has sufficient battery for continuous operation.
What is loop recording?
Loop recording overwrites the oldest video when the SD card is full, ensuring continuous recording without manual file management.
How do I reset the device?
Locate the reset button (often a small pinhole) and press with a paperclip for 5 seconds. Alternatively, remove the battery and reconnect.
Can I update the firmware?
Check the Boyo website for updates. Copy the firmware file to a formatted MicroSD card, insert into the camera while off, then power on. The update starts automatically.

User questions about VTC700RQ-2 Boyo

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Dash cam in PDF format for free! Find your manual VTC700RQ-2 - Boyo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VTC700RQ-2 by Boyo.

USER MANUAL VTC700RQ-2 Boyo

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Boyo

Model : VTC700RQ-2

Category : Dash cam