FastPunch Keystone Jack - Cables for Computers and Peripherals Intellinet - Free user manual and instructions
Find the device manual for free FastPunch Keystone Jack Intellinet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Keystone Jack |
| Brand | Intellinet |
| Model | FastPunch Keystone Jack |
| Category | Cables for Computers and Peripherals |
| Connector Type | RJ45 Female |
| Cable Termination | 110 Punch-Down |
| Compatibility | CAT5e, CAT6, CAT6a |
| Material | High-Impact Plastic Housing, Gold-Plated Contacts |
| Color | White (typical) |
| Dimensions (Standard Keystone) | 14.5 x 16.2 x 21.0 mm (approx.) |
| Weight | 10 g (approx.) |
| Operating Temperature | -10°C to 60°C |
| Storage Temperature | -40°C to 70°C |
| Humidity (Operating) | 10% to 90% (non-condensing) |
| Dielectric Strength | 1000 VAC |
| Contact Resistance | ≤ 20 mΩ |
| Insulation Resistance | ≥ 1000 MΩ |
| Insertion/ Extraction Cycles | ≥ 750 cycles |
| Warranty | Lifetime |
| Maintenance and Cleaning | Use a dry cloth; avoid liquids and abrasive cleaners. |
| Safety | Install in a dry environment; avoid static discharge during installation. |
| Spare Parts and Repairability | Not user-serviceable; replace if damaged. |
| Included Accessories | Quick Installation Guide |
Frequently Asked Questions - FastPunch Keystone Jack Intellinet
What tools are needed to terminate the FastPunch Keystone Jack?
You need a 110 punch-down tool with a cutting blade to terminate cables into the keystone jack. A wire stripper and a cable tester are also recommended.
Is this keystone jack compatible with CAT6 cables?
Yes, the FastPunch Keystone Jack is compatible with CAT5e, CAT6, and CAT6a cables.
How do I punch down the wires correctly?
Follow the T568A or T568B wiring standards printed on the jack. Strip about 1 inch of cable jacket, untwist pairs, arrange wires per standard, and use a punch-down tool to seat each wire into its slot.
Can I reuse the keystone jack after removing wires?
It is not recommended. The punch-down slots are designed for one-time use. Repeated punching may damage the contacts. Use a new jack for best performance.
What is the difference between T568A and T568B wiring?
Both are valid wiring standards. T568A uses green/white-green pair on pins 1-2, while T568B uses orange/white-orange. Choose one standard and be consistent throughout your network.
How do I test the connection after termination?
Use a network cable tester to check continuity, mapping, and signal integrity. Insert a known-good patch cable to verify.
Does the keystone jack come with a dust cover?
Most Intellinet FastPunch keystone jacks include a snap-on dust cover to protect the contacts when not in use.
What is the maximum cable length I can use?
For standard Ethernet (100BASE-TX or 1000BASE-T), the maximum cable length is 100 meters (328 feet) including patch cords.
Can I use this keystone jack with solid or stranded wire?
It is designed for solid copper wire (22-24 AWG). Stranded wire may not terminate properly and could cause connection issues.
How do I clean the keystone jack?
Use a dry, lint-free cloth to wipe the exterior. Do not use liquids or sprays. For contacts, use compressed air or a contact cleaner specifically for RJ45 jacks.
User questions about FastPunch Keystone Jack Intellinet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Cables for Computers and Peripherals in PDF format for free! Find your manual FastPunch Keystone Jack - Intellinet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FastPunch Keystone Jack by Intellinet.