REFLECT iCVBT3 - Uncategorized IHOME - Free user manual and instructions
Find the device manual for free REFLECT iCVBT3 IHOME in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bluetooth Speaker with LED Lighting |
| Brand | iHome |
| Model | REFLECT iCVBT3 |
| Dimensions (W x H x D) | 6.0 x 3.0 x 3.0 inches (15.2 x 7.6 x 7.6 cm) |
| Weight | 0.5 kg (1.1 lbs) |
| Power Source | Rechargeable lithium-ion battery, USB-C charging (5V/1A) |
| Battery Life | Up to 8 hours at moderate volume |
| Bluetooth Version | Bluetooth 5.0 |
| Bluetooth Range | Up to 33 feet (10 meters) |
| Audio Output | 5W RMS (mono) |
| Frequency Response | 80 Hz - 20 kHz |
| Built-in Microphone | Yes, for hands-free calls |
| LED Lighting Effects | Multi-color cycling, pulse-to-music |
| Controls | Power, Volume +/-, Play/Pause, LED mode, Call answer/end |
| Water Resistance | IPX4 (splash-proof) |
| Maintenance | Clean with soft, dry cloth; avoid liquids entering ports |
| Safety | Do not immerse in water; keep away from extreme heat |
| Spare Parts & Repairability | Contact iHome customer support for accessories or repairs |
| Included Accessories | USB-C charging cable, user manual |
| Compatibility | Smartphones, tablets, laptops with Bluetooth |
Frequently Asked Questions - REFLECT iCVBT3 IHOME
How do I pair my iHome REFLECT iCVBT3 with a device?
Turn on the speaker by pressing the power button. The LED indicator will flash blue. On your device, enable Bluetooth and select 'iHome REFLECT iCVBT3' from the list. If prompted, enter PIN 0000.
How long does the battery last on a full charge?
The battery lasts up to 8 hours at moderate volume. Actual battery life may vary depending on volume level and LED usage.
How do I charge the speaker?
Use the included USB-C cable to connect the speaker to a USB power adapter (5V/1A recommended). The LED indicator will turn red while charging and turn off when fully charged.
Can I use the speaker while it is charging?
Yes, you can use the speaker while it is charging. However, charging time may be longer if the speaker is in use.
How do I adjust the volume?
Press the Volume + or Volume - buttons on the speaker. Volume can also be adjusted from the connected device.
How do I change the LED lighting effects?
Press the LED mode button to cycle through different lighting modes: solid colors, cycling, pulse-to-music, and off.
Is the speaker water-resistant?
Yes, the iHome REFLECT iCVBT3 has an IPX4 rating, meaning it is splash-proof. Do not submerge it in water.
Why is there no sound from the speaker?
Ensure the speaker is powered on and paired with your device. Check that the volume on both the speaker and the device is turned up. Also, verify that the audio is playing on the connected device.
How do I reset the speaker to factory settings?
To reset, turn off the speaker, then press and hold the Power button for 10 seconds until the LED flashes rapidly. The speaker will restart and clear the pairing history.
What should I do if the speaker is not charging?
Check the USB-C cable and adapter for damage. Try a different cable or power source. If the issue persists, contact iHome customer support for assistance.
User questions about REFLECT iCVBT3 IHOME
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual REFLECT iCVBT3 - IHOME and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. REFLECT iCVBT3 by IHOME.
USER MANUAL REFLECT iCVBT3 IHOME
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : IHOME
Model : REFLECT iCVBT3
Category : Uncategorized